05 winchesters

[Dravic]

I currently have an CBBID 0503 @ 2547 1.55v

 

[PoopyPants]

nice to see you fellas are on top of this stuff as im getting ready to get a winnie 3500

anywhere around here that you can buy a cpu from and request the week and year of the chip ??

 

[ironique]

Hey Poopy, noticed your running your dimms at 290Mhz at 2.5-3-3-8. Sweet!

 

[brewzer420]

Originally posted by: diabloII
if i order an oem winchester from monarch right now, the chances are that i'll get an 05 - right?

I ordered about 1 week ago and got a 0451. It is a CBBID.

I am not sure when people will get it throught their thick skulls that no single chip can be classified as a good or great oc'er. Each chip is different and YMMV with regards to the steppings. While the CBBID's have had some poor oc'ing results I have also seen some at 2700mhz and above.

 

[tr1kstanc3]

i got a 0451 CBBID from zzf and it can only hit 2.45ghz @ 1.58v. still better than the stock 2ghz =)

 

[stfrances]

tr1kstnc3, what is your cooling set-up, has anyone got an h20 set-up and at what results?

 

[tr1kstanc3]

xp90 with a dab of as5 and a 92mm panaflo ~2200rpm

temps range from 35c-50c

 

[Jeff7181]

I have a week 2 '05 3500+ that's running 2.4 GHz on 1.33 V (actual as read by MBM5)... I can't get it much past 2.4, and I think it's because of my RAM. I've heard these processors don't like CH-5 chips and that's what I have.

 

[LoN3R]

05 week 03 , 3000+
260 x 9 Super Pi , Prime and bench stable ,
DFI NF4 ultra-d
G.Skill 2x256 LE

 

[khurios2000]

0503, 3000+
260x9 Super PI, Prime and bench stable,
DFI Ultra-D
OCZ VX Gold 3200 @ 2-2-2-5

I suspect my ocz is the limitation, but who knows?
Should i buy g.skill?

 

[Snowice]

Originally posted by: khurios2000
0503, 3000+
260x9 Super PI, Prime and bench stable,
DFI Ultra-D
OCZ VX Gold 3200 @ 2-2-2-5

I suspect my ocz is the limitation, but who knows?
Should i buy g.skill?

use memory divider to see how far your cpu can go first.

 

[Duvie]

Originally posted by: khurios2000
0503, 3000+
260x9 Super PI, Prime and bench stable,
DFI Ultra-D
OCZ VX Gold 3200 @ 2-2-2-5

I suspect my ocz is the limitation, but who knows?
Should i buy g.skill?

Nope...In my opinion they are intel memory...high overclock with high HTT and they wont do rated speeds...I have tried 4 sticks now....

I would stick with the VX and run those tight cas 2 timings at 3200 or as close as you can stay to it....

 

[tr1kstanc3]

where are you guys picking up the 0503 winchesters? looks temping.

 

[thanatos355]

i've got an 0502. will let you know how it runs after i get my pci auto-lock to function correctly and allow me to go over 215-219! thinking i need to flash the bios to a newer version. just wish that they had a newer 'final' instead of all these damn betas!

 

[govtcheez75]

i got an 0502 as well. It's a little better than my 0451 which wouldn't do 2.5ghz. This one seems to do 2.5ghz just fine, but I couldn't really go over, since my G.Skill memory was bad. I'm getting some PDP Patriot XBL's soon, so I should be able to see if it'll go over 2.5ghz soon.

 

[thanatos355]

what version of the gskill did you have? i got some of the pc4400 lc. great stuff. 2-2-2-5-1t @ddr400. havent been able to push it yet though.

 

[Duvie]

It wont go far as you start ocing the HTT and overall clock speed....You will probably be happy with those sweet timings at 400dr (remember the A64's are not dependent upon memory bandwidth, they like low latency) or 500ddr timings with low cas 2.5's.....

I have a pare that can do 600ddr cas 3,1t...unfortunately I need the 7x300 to do it...then at 8x I can go as high as 290's...then the 9x I cant get 275 1:1 to like cas 3....It a degradation downhill.....

 

[bluslice]

i just got my winnie from a friend who works at malabs. hopefully i got 05 =\

 

[thanatos355]

Originally posted by: Duvie
It wont go far as you start ocing the HTT and overall clock speed....You will probably be happy with those sweet timings at 400dr (remember the A64's are not dependent upon memory bandwidth, they like low latency) or 500ddr timings with low cas 2.5's.....

I have a pare that can do 600ddr cas 3,1t...unfortunately I need the 7x300 to do it...then at 8x I can go as high as 290's...then the 9x I cant get 275 1:1 to like cas 3....It a degradation downhill.....

oh yeah, i know it wont hold those timings, but it's rated at 2.5-4-4-8 @ ddr550! most reviews i've seen of it will get 2.5-3-3-7 at that speed. i think that's a pretty good trade.

 

[AndyBogard]

I just got my 3200 Winchester yesterday, building the computer today.

I got mine from Newegg, I ordered last Sunday.

CBBID: is a 05 week 03

Going to overclock, but can't decide wether I want to try this weekend or wait.

 

[bluslice]

i just checked and it's year 05 week 4!!! lucky me. Hopefully I'll hit 2.6-2.7 =)

 

[Dug]

Got a 0501 3200+ 90nm.

2.6Ghz stable at 1.53v.

 

[perillo34]

I got a Week 0504, running supa stable at 9x285, retail from the Chief on an epox 9nda3j. I hope that helps, vcore is at 1.475 idles at 35 with stock cooling on it, but i never see over 45 with my case system underload.

 

[tr1kstanc3]

0503 3000+ CBBID

2.55ghz @ 1.55v

 

[thunderroller]

i have 05 it is ok not bad