are you kidding? i recommended this boardOriginally posted by: maxSe
Thugs and Abit... just doesn't sound right together, does it....
are you kidding? i recommended this boardOriginally posted by: maxSe
Thugs and Abit... just doesn't sound right together, does it....
Originally posted by: maxSe
Thugs and Abit... just doesn't sound right together, does it....
Thugs & Mikki, I happened to like the "funkiness" of BH-7... hehe.. :Q
Originally posted by: Mikki
Originally posted by: maxSe
Thugs and Abit... just doesn't sound right together, does it....
Thugs & Mikki, I happened to like the "funkiness" of BH-7... hehe.. :Q
I'd take a BH7 over a P4PE....
Alright maxSe, you just lost some cool points.... j/k bud....not my cup of tea I guess....I dig those silver ones Albatron is selling tho, and I've seen a black one that's pretty sharp....
Originally posted by: pastorjay
It is a nice board, I don't really care for the color of the board though... me and orange don't get along to good! Hehe
By the way, I am in a Radio Shack typing this right now... I hate being away from my rig, but I had to check in and see how you all were doing.
Originally posted by: Spicedaddy
I like it, throw in some HyperX ram and you got that blue/orange P4 theme going on...
Originally posted by: Spicedaddy
I like it, throw in some HyperX ram and you got that blue/orange P4 theme going on...
Originally posted by: THUGSROOK
not quite as good as the ASUS crash free bios :beer:Originally posted by: LastRide
Its nice not having to go in the case to clear the CMOS eh!.
Originally posted by: THUGSROOK
ddr 400 on def vdimm aint bad for VR2700 :Q
Originally posted by: bjc112
Bumped voltage 5%
Now at 165 FSB, 2.98 Ghz, looping 3dmark and what not...
166 is 3ghz correct?
I am however checking temps in the BIOS immediatley after i run Prime 95 and seeing temps about 50C may-b 52.. i hear Abits are off about 5 degrees so i figure i can be at 3ghz safely...
Let me know...
Originally posted by: maxSe
Originally posted by: bjc112
Bumped voltage 5%
Now at 165 FSB, 2.98 Ghz, looping 3dmark and what not...
166 is 3ghz correct?
I am however checking temps in the BIOS immediatley after i run Prime 95 and seeing temps about 50C may-b 52.. i hear Abits are off about 5 degrees so i figure i can be at 3ghz safely...
Let me know...
Abit always runs .4 fsb higher than stock... sooo, 166fsb = 2.995. Just go right up to 167fsb (or 170 if you're feeling lucky.. ). You should be alright. The temp looks about the same as my SL6EF, so everything looks good so far~
Originally posted by: Tates
I just dropped in a new SL6EF from Newegg into my Abit BH7 (6+ hours of Prime95):
162fsb......2925MHz @ default setting (BH7 undervolts, 1.488v actual)
172fsb......3105MHz @ +5% (BH7 undervolts, 1.575v actual)
I leave it at the BH7 default of 1.488v/2925MHz with Corsair XMS3500C2 512MB running 433MHz @ 2/2/2/5 (CPU : DDR ratio 3:4)
With my ThermalRight SKU-900U, ambient room temp 21C, average temps:
36C Idle
48C Load