2100+ Tbred B (? -> yes!) at newegg for 92->101 dollars (1/14/03)

[LastRide]

My SLK-800 with a Panaflo High fan 39CFM I get 28C at 166 FSB on my 8RDA+ and 2100+ Tbred.Nice quite setup that does the job.

 

[pillage2001]

Originally posted by: Shimmishim

Originally posted by: pillage2001

Originally posted by: Shimmishim
yay!

i'm doing okay with this thing now...

51C full load...

2280 (13 x 175) @ 1.725V

not too bad...



i think this chip has more head room...

i ordered a 80 to 60 mm fan attachment because this slk-800 REALLY doesn't like my cpu...

Better news for me.

HAHAHA....

man, it's going to be SOOOO hard to part with this 1700+ though 700 mhz o/c with this baby

Don't worry. I'll take care of it as if it's my own. I still need a new mobo to O/c the new CPU if I were to get it from ya. Waiting for Kt400A

 

[Shimmishim]

Originally posted by: LastRide
My SLK-800 with a Panaflo High fan 39CFM I get 28C at 166 FSB on my 8RDA+ and 2100+ Tbred.Nice quite setup that does the job.

that's the thing...

it's such a great heatsink! i don't understand why this 2100+ doesn't like it though... i installed the heatsink the same way for the 2100+ and the 1700+ but it doesn't like the 2100+ though...

i'm going to make 1 more attempt tomorrow... if it fails... then i'm selling my slk 800

 

[bgeh]

Originally posted by: Shimmishim

Originally posted by: LastRide
My SLK-800 with a Panaflo High fan 39CFM I get 28C at 166 FSB on my 8RDA+ and 2100+ Tbred.Nice quite setup that does the job.

that's the thing...

it's such a great heatsink! i don't understand why this 2100+ doesn't like it though... i installed the heatsink the same way for the 2100+ and the 1700+ but it doesn't like the 2100+ though...

i'm going to make 1 more attempt tomorrow... if it fails... then i'm selling my slk 800

yup and I presume that you will be getting the SLK-800A or the SLK-900, right?

 

[bgeh]

Originally posted by: Shimmishim
tell me about it!

this is my 4th!!! 2 1700+ and 2 2100+

the second 1700+ is doing 2170 right now
the first 1700+ only did 1950

the first 2100+ did 2125
the second 2100+ .... i can boot 2200

but we'll see how this 2100+ does... i'll play around with it more either thursday or friday...

shim, give me your old chip,please
anything is better than my palo 1700+ that can only do 1580mhz max

 

[bgeh]

sorry, double post

 

[Shimmishim]

hehehe...

no, i can't waste anymore money!!!

i'm technically a "poor college" student...

... with a lil extra cash funds from the parentals...



argh... sorry ... pillage2001 has been PMing me about my 1700+....

maybe i'll just sell it to whoever offers me the most money hahaha...

 

[pillage2001]

Originally posted by: Shimmishim
hehehe...

no, i can't waste anymore money!!!

i'm technically a "poor college" student...

... with a lil extra cash funds from the parentals...



argh... sorry ... pillage2001 has been PMing me about my 1700+....

maybe i'll just sell it to whoever offers me the most money hahaha...

Why are you telling them about our affair?!?!

LOL, If you're willing to ship it to Malaysia, I think Bgeh might be able to have the chip but.......get in line yo!!

 

[LastRide]

I forgot to mention that the 28C is overclocked to 166FSB (13 multiplier).I get 24-25C at stock 2100+.I think you know but put the AS3 on thin,like paint.Also I assume you have the SLK-800 on the right direction.

 

[bgeh]

Originally posted by: pillage2001

Originally posted by: Shimmishim
hehehe...

no, i can't waste anymore money!!!

i'm technically a "poor college" student...

... with a lil extra cash funds from the parentals...



argh... sorry ... pillage2001 has been PMing me about my 1700+....

maybe i'll just sell it to whoever offers me the most money hahaha...

Why are you telling them about our affair?!?!

LOL, If you're willing to ship it to Malaysia, I think Bgeh might be able to have the chip but.......get in line yo!!

damn.....paypal's not available to malaysians
i guess i must start saving for the chip(and my next rig)

 

[chizow]

Originally posted by: bgeh

damn.....paypal's not available to malaysians
i guess i must start saving for the chip(and my next rig)

Can't you just run down the street and snag yourself a Hammer???
I'd sell you my old 1700+ and an 8045 for cheapo, but shipping Int'l is too much trouble

Chiz

 

[Shimmishim]

Originally posted by: LastRide
I forgot to mention that the 28C is overclocked to 166FSB (13 multiplier).I get 24-25C at stock 2100+.I think you know but put the AS3 on thin,like paint.Also I assume you have the SLK-800 on the right direction.

hehhee... yes ... everything is fine

i dunno what's wrong.. it just REALLY doesn't like it for some reason...

my 1700+ runs fine on it... it's just one of those computer mysteries of life i guess...

note:

my 2100+ is now running at 2.3 ghz !!! WOO HOO!!!

it failed prime though after 2 to 3 hours... but i think it failed because temps got up to 55 to 56 C ... i think it's a heat issue more so than "hit a wall" issue...

only at 1.75V

bgeh: you're in malaysia!!!!!!!!!!

 

[bgeh]

Originally posted by: Shimmishim

Originally posted by: LastRide
I forgot to mention that the 28C is overclocked to 166FSB (13 multiplier).I get 24-25C at stock 2100+.I think you know but put the AS3 on thin,like paint.Also I assume you have the SLK-800 on the right direction.

hehhee... yes ... everything is fine

i dunno what's wrong.. it just REALLY doesn't like it for some reason...

my 1700+ runs fine on it... it's just one of those computer mysteries of life i guess...

note:

my 2100+ is now running at 2.3 ghz !!! WOO HOO!!!

it failed prime though after 2 to 3 hours... but i think it failed because temps got up to 55 to 56 C ... i think it's a heat issue more so than "hit a wall" issue...

only at 1.75V

bgeh: you're in malaysia!!!!!!!!!!

ahhh, yes.
i forgot to mention the shipping cost too

 

[Shimmishim]

WOO HOO!!!

2.3 ghz @ 1.75V

Passed 6+ hours of prime. It was a heat issue.

I took my rotating fan i have in my room and made it blow on my board and cpu. Dropped the temp from 55 to 50C at full load

I woke up and lo and behold... prime still running...

It's running warm but i think this might be a winner!!!

pillage... i might just have to let this 1700+ go now!!! but we'll see... i REALLY want to fix this heat issue first...

if i can get this heat issue fixed, i'll definitely let it go

 

[Jen]

Originally posted by: Shimmishim
WOO HOO!!!

2.3 ghz @ 1.75V

Passed 6+ hours of prime. It was a heat issue.

I took my rotating fan i have in my room and made it blow on my board and cpu. Dropped the temp from 55 to 50C at full load

I woke up and lo and behold... prime still running...

It's running warm but i think this might be a winner!!!

pillage... i might just have to let this 1700+ go now!!! but we'll see... i REALLY want to fix this heat issue first...

if i can get this heat issue fixed, i'll definitely let it go

sounds to me like the processor is a golden


with right amount of cooling should be able to see 2400mhz plus



Jen

 

[Shimmishim]

Originally posted by: Jen

Originally posted by: Shimmishim
WOO HOO!!!

2.3 ghz @ 1.75V

Passed 6+ hours of prime. It was a heat issue.

I took my rotating fan i have in my room and made it blow on my board and cpu. Dropped the temp from 55 to 50C at full load

I woke up and lo and behold... prime still running...

It's running warm but i think this might be a winner!!!

pillage... i might just have to let this 1700+ go now!!! but we'll see... i REALLY want to fix this heat issue first...

if i can get this heat issue fixed, i'll definitely let it go

sounds to me like the processor is a golden


with right amount of cooling should be able to see 2400mhz plus



Jen

FINALLY AFTER 4 TRIES!!!

 

[Jen]

Originally posted by: Shimmishim

FINALLY AFTER 4 TRIES!!!

i know someone belgium is on his 5th one now and still searching for one like yours


he can get them to 2350 to 2400mhz with 1.95 volts but nothing lower



thinking to myself it may be time to sell this one and step off the plate


currently running 13 x 185


let the smoke roll


if you see tiles falling off ..........let me know



Jen

 

[pillage2001]

Originally posted by: Shimmishim
WOO HOO!!!

2.3 ghz @ 1.75V

Passed 6+ hours of prime. It was a heat issue.

I took my rotating fan i have in my room and made it blow on my board and cpu. Dropped the temp from 55 to 50C at full load

I woke up and lo and behold... prime still running...

It's running warm but i think this might be a winner!!!

pillage... i might just have to let this 1700+ go now!!! but we'll see... i REALLY want to fix this heat issue first...

if i can get this heat issue fixed, i'll definitely let it go

w000t w00000000t. Yay!!!!!!!!

 

[Shimmishim]

okay... here i go for attempt 3 at putting this slk-800 on!

wish me luck!

 

[Jen]

Originally posted by: Shimmishim
okay... here i go for attempt 3 at putting this slk-800 on!

wish me luck!

best of luck to you friend




well prime 95 still running



and i havent crashed yet



Jen

 

[BigJ]

Did I mention I just got another 2100+ Tbred B to play with? My friend is dropping his rig off now. 1gb of PC3500, 2100+ and water cooling, radeon 9700 pro AIW, drool

 

[Shimmishim]

uhh... isn't it goign to be a pain with the water?

good luck!

got this slk-800 on right now... it's running okay...

 

[BigJ]

Originally posted by: Shimmishim
uhh... isn't it goign to be a pain with the water?

good luck!

got this slk-800 on right now... it's running okay...

Water is already setup. All i gotta do is install processor, hd, ram, vid card, and install Windows 2k.

 

[Shimmishim]

WOW!

this slk800 is a beast!!!

i was using a taisol with my rotating fan.. max temp = 50C

i think i have the slk properly installed now...

46C at full load @ 1.75V

2312 mhz according to wcpuid

!!!!!!

anyone think i can go higher?

should i try?



2400 maybe?

naw, i doubt it

note:

hmm... does that mean that my 1700+ would run cooler? now that i know the correct way to install it? :Q it was running 46C full load... whoa.. maybe it'd run 43 or even 42!!!

hehehe... i'm tempted to try..

 

[Jen]

Originally posted by: Shimmishim
WOW!

this slk800 is a beast!!!

i was using a taisol with my rotating fan.. max temp = 50C

i think i have the slk properly installed now...

46C at full load @ 1.75V

2312 mhz according to wcpuid

!!!!!!

anyone think i can go higher?

should i try?



2400 maybe?

naw, i doubt it

note:

hmm... does that mean that my 1700+ would run cooler? now that i know the correct way to install it? :Q it was running 46C full load... whoa.. maybe it'd run 43 or even 42!!!

hehehe... i'm tempted to try..

dont be shy


crank it on up........and let the smoke roll



should do the 2400mhz mark


i wouldnt be surprised see it at 2500mhz with this processor



Jen