- May 25, 2008
- 6
- 0
- 0
System setup overview
750i SLi
corsair DDR2 800 (pc2-6400) 2x2GB
8 fans, liquid cooling
BIOs settings
450FSB
500mhz MEM
1.31 vcore
1.48 NB
1.58 SB
1.44 VTT
2.19 MEM
5-5-5-15 (defaults were 5-5-5-18 it was advertised as the 4-4-4-12 though, wasn't 100% sure in making the tightening of 18 to 15 =/)
Followed the guide in these forums for all the enables and disables.
My BIOs pretty much only gives me the above options to change.
My system seems to be able to run anything except for 95stress test, the computer locks up after 5 minutes or so, and core0 fails after 3 seconds =/. Could anyone guide me towards a core0 that doesn't fail as fast =). I was watching temps until the lockup no core ever passed 46c on 100% load, and the minimum was 28c which was on 0~5% load. If I missed some information ask me and I'll give it to you. Yes, I immediately went for the 3.6 from 2.66 lol.
Regards,
Matt
750i SLi
corsair DDR2 800 (pc2-6400) 2x2GB
8 fans, liquid cooling
BIOs settings
450FSB
500mhz MEM
1.31 vcore
1.48 NB
1.58 SB
1.44 VTT
2.19 MEM
5-5-5-15 (defaults were 5-5-5-18 it was advertised as the 4-4-4-12 though, wasn't 100% sure in making the tightening of 18 to 15 =/)
Followed the guide in these forums for all the enables and disables.
My BIOs pretty much only gives me the above options to change.
My system seems to be able to run anything except for 95stress test, the computer locks up after 5 minutes or so, and core0 fails after 3 seconds =/. Could anyone guide me towards a core0 that doesn't fail as fast =). I was watching temps until the lockup no core ever passed 46c on 100% load, and the minimum was 28c which was on 0~5% load. If I missed some information ask me and I'll give it to you. Yes, I immediately went for the 3.6 from 2.66 lol.
Regards,
Matt