3 Public IP's...

[Kristi2k]

How do I assign 3 PC's a public IP? I have 3 IP's from Cox.

 

[tyanni]

Turn off DHCP on your router, so its acting like a switch (or just use a switch instead) and then assign your 3 pcs static IPs, using the 3 IPs you got from COX. This is assuming you have 3 static Ips. If you are just given 3 dynamic ips, then just turn off DHCP on the router, leave it on for the pcs, and allow the modem\COX to assign the IPs.

Tim

 

[Kristi2k]

How would this be done if this was in a corporate environment? Such as, an ISP assigns the company 3 public IP's.

1 IP would go to a webserver, another to email and the other for internet use.

 

[Goosemaster]

Originally posted by: Kristi2k
How would this be done if this was in a corporate environment? Such as, an ISP assigns the company 3 public IP's.

1 IP would go to a webserver, another to email and the other for internet use.

Dynamic or static, and with or without NAT?

With NAT, you would create a pool encompassing the range or create three seperate entries. Then you would assign them to the outside for a specific internal PC's inside address.

 

[rumptis]

with a real firewall like a Cisco PIX or something like that you can assign more then one IP Address to it so it will respone to any of the IP's you have.

 

[jjoyner]

Originally posted by: Goosemaster

Originally posted by: Kristi2k
How would this be done if this was in a corporate environment? Such as, an ISP assigns the company 3 public IP's.

1 IP would go to a webserver, another to email and the other for internet use.

Dynamic or static, and with or without NAT?

With NAT, you would create a pool encompassing the range or create three seperate entries. Then you would assign them to the outside for a specific internal PC's inside address.

Correct! Give Goose a cigar. NAT masks your internal networking...
To assign 3 pc/servers external IPs, simply enable their exposure in the firewall and assign them their static IPs. I am assuming you have a T1/DSU off smartjack. I hope you don't have 3 IPs on DSL or cable, that kinda underminds the technology.

 

[martind1]

you can just go, modem->switch then in the swtich connect the 2 servers and a router which has all other pcs behind it. piece of cake.

but then again if you only have 1 webserver and 1 email server then you only really need 1 ip address, and might not have to pay for the 3 ip addressess.

 

[Goosemaster]

Originally posted by: martind1
you can just go, modem->switch then in the swtich connect the 2 servers and a router which has all other pcs behind it. piece of cake.

but then again if you only have 1 webserver and 1 email server then you only really need 1 ip address, and might not have to pay for the 3 ip addressess.

I would NEVER recommend having a production server directly connected to the internet. Hell, the same goes for everything besides a firewall.

 

[Goosemaster]

Originally posted by: jjoyner

Originally posted by: Goosemaster

Originally posted by: Kristi2k
How would this be done if this was in a corporate environment? Such as, an ISP assigns the company 3 public IP's.

1 IP would go to a webserver, another to email and the other for internet use.

Dynamic or static, and with or without NAT?

With NAT, you would create a pool encompassing the range or create three seperate entries. Then you would assign them to the outside for a specific internal PC's inside address.

Correct! Give Goose a cigar. NAT masks your internal networking...
To assign 3 pc/servers external IPs, simply enable their exposure in the firewall and assign them their static IPs. I am assuming you have a T1/DSU off smartjack. I hope you don't have 3 IPs on DSL or cable, that kinda underminds the technology.

gotta :light: ?

 

[martind1]

I would NEVER recommend having a production server directly connected to the internet. Hell, the same goes for everything besides a firewall.

exactly.