SlowSpyder
Lifer
- Jan 12, 2005
- 17,305
- 1,002
- 126
Originally posted by: bryanW1995
This is just a pet peeve, but I hate it when the egg lists an OC version of a card without clearly showing what the oc is (look at the two xfx cards).
Originally posted by: SlowSpyder
Originally posted by: bryanW1995
This is just a pet peeve, but I hate it when the egg lists an OC version of a card without clearly showing what the oc is (look at the two xfx cards).
Shows 850MHz vs. 875MHz for me.
http://www.dailytech.com/ATI+R...Taken/article14616.htmThe chip is not just an overclocked RV770, as there are a few tweaks and modifications that we are still investigating.
http://www.anandtech.com/video/showdoc.aspx?i=3539&p=3For the Radeon HD 4890 our hardware specs are pretty simple. Take a 4870 1GB and overclock it. Crank the core up 100 MHz to 850 MHz and the memory clock up 75 MHz to 975 MHz. That's the Radeon HD 4890 in a nutshell.
Being a revised RV770, the new graphics core RV790 is, however, not pin-compatible with its predecessor and made it necessary to develop a new PCB for the Radeon HD 4890 series.
Note: There is a possibility that the statement regarding the memory controller supporting burst read mode is an error in the promotional material handed out by AMD and will be retracted.When they designed RV790, they revised the entire RV770 internal structure quite significantly, having rebalanced internal chip timings and optimized its internal power circuitry. The memory controller now supports burst read, which was earlier implemented in RV710 and 730. But most importantly, they added a capacitor Decap Ring along the entire RV790 perimeter, which should improve the signal quality by lowering the parasitic noise.
http://forum.beyond3d.com/show...ad.php?t=50698&page=42Just a quick update. RV790 does *not* support burst memory reads, we had an error in our documentation that will be fixed and updated shortly, sorry about that. Y'all are just too quick scanning through things and finding nuggets like that. There are some tweaks in RV790, but burst reads is not one of them.
So, the power circuitry of the Radeon HD 4890 has been reinforced to seven phases. The two top phases with single-channel PA0511 inductors and compact power drivers seem to be responsible for GDDR5 memory whereas the other five phases, with advanced power components and an assemblage of dual- and triple-channel PA1312NL and CPLA-3-50 inductors, power the graphics core. For comparison, the Radeon HD 4870 had a three-phase GPU voltage regulator with a possibility of expanding to four phases. The more complex power circuit is necessary as the Radeon HD 4890 is specified to have a peak power consumption of 190 watts.
The power circuit is controlled by two Volterra VT1165MF controllers. These chips allow to adjust the GPU voltage from software. It is for VT1165-based cards that EVGA has released its GPU Voltage Tuner program, so there seem to be no theoretical obstacles to creating a similar tool for the Radeon HD 4890.
Originally posted by: BFG10K
Check out the hugely reduced power consumption in the XBit review, and also the amazing performance in Call of Duty 5 and Fallout 3.