A few questions about the P5B deluxe

[imported_Lost Soul]

I have a few questions. 1:If you have a board with the 8pin and 24 pin PSU plugs in it, should you plug in all 8 and all 24? or should you leave out 4 from the 8 and 24? Its a bit confusing in the manual. Wasnt sure if I should do all of them as long as my PSU has them all ofcourse.

2oes anyone know the most stable bios for the Asus P5B deluxe board? and what the safest way to flash it would be?

3:And, does anyone know the most stable Volts for the corsair 1gig (800) sticks would be. After looking around , it seems some people are sayign 1.9volts. yet, if you look at the sticks, it reads 2.1v ram. Can anyone confirm this?

4:and last, what would be the things I need to set to make my comp boot the fastest with out effecting safty and stability?

thnx all

 

[imported_BigTwin]

I'd recommend the 8 pins...my system is more stable after going to the 8 pins

 

[imported_mdc]

I'll have to recommend the 0614 BIOS, since it is the one that allowed me to run my Ballistix pc6400 memory. The later ones on asus FTP were not as stable in my case.

Definitely use the 24 pin ATX power connection if you have it, and the 8 pin 12v if you have it. I'm using the 4 pin 12v connector and it couldn't be more stable, though I've seen enough people having improvments with the 8 pin to recommend it.

 

[imported_Lost Soul]

Ok, cool, thnx guys