Originally posted by: LiLithTecH
You will also get "Site Wiring Fault error light" if the voltage is under 100v.
What size UPS are you using (the most common is 800va for Home\Office use)?
What are you connecting to it? (hopefully not a Laser Printer )
Belkin Office Series Battery Backup UPS, 890 Joules, 550VA. The only thing that will be attached is Computer, Monitor, and router. The inkjet printer and any other devices will be run through another basic surge protecter. I doubt the voltage is under 100v, but I plan on testing it as well. The UPS lights up red for the site wiring fault when nothing is connected, the same when a simple light is connected to any of the 4 surge protected/battery backup outlets. It also has 2 outlets with just surge protection (no power backup) that work fine.
Originally posted by: rhfactor
PSU 350 should be enough for 1 DVD and 1 HD. What case do you have? If your CPU is not overheating then it could be your RAM. Do you have heat spreaders on your RAM?
My case is the X-Dreamer II with plenty of air flow. The internal temperatures stay right around 80 F even near the ram or motherboard. I don't have heat spreaders on the ram, but because of the decent case temp and no OC'ing or adjusted timings I didn't think the ram would be an issue. Memtest86 comes up fine as well.