- Feb 27, 2005
- 250
- 0
- 0
No matter what I do, my A8N-E will not boot at FSB's over 245. I set the CPU multiplier to 4x to test to see what the max FSB the board will boot at is and the highest I can go is 245Mhz. I've tried setting the HT bus to 4x as well (keeping it under 1000) and still won't work. PCI-E is set at 100Mhz and PCI is set at 33Mhz. Ram is on an 83% divider, which puts it at 207.5 (it's fine up until about 212Mhz, so that shouldn't be the problem). I've even tried loosening the timings on the RAM and no go. It basically gets to the point where it detects IDE devices, finishes that and then never gets any farther. Anyone have any suggestions I can try? My specs are in my sig, but for those who don't feel like looking, here goes:
Asus A8N-E rev 2.0 (1010 Bios)
3200+ Venice core (wk 0505)
Rosewill 6600GT PCI-E
Tekram U2W SCSI card
ATI TV Wonder
WD800JB 80GB hard drive
WD1200JB 120GB hard drive
Seagate X15-36LP 18GB 15k rpm SCSI drive (boot drive)
Coolermaster RealPower 450W power supply
NEC ND3540A DVD-RW
LG DVD/CD-RW combo
Asus A8N-E rev 2.0 (1010 Bios)
3200+ Venice core (wk 0505)
Rosewill 6600GT PCI-E
Tekram U2W SCSI card
ATI TV Wonder
WD800JB 80GB hard drive
WD1200JB 120GB hard drive
Seagate X15-36LP 18GB 15k rpm SCSI drive (boot drive)
Coolermaster RealPower 450W power supply
NEC ND3540A DVD-RW
LG DVD/CD-RW combo