- May 20, 2007
- 3,517
- 0
- 0
Originally posted by: bassjunkie
Do you mean aim for a max temp of 60c? and yes as far as im aware its 85c Tj.
Yes...60 to 62C under Orthos large mode with Vcore = VID plus 100%. Use the highest stable FSB.
Originally posted by: bassjunkie
Do you mean aim for a max temp of 60c? and yes as far as im aware its 85c Tj.
Originally posted by: sharad
Originally posted by: SerpentRoyal
Yes...not an issue at all. That mosfet driven fan header is very robust. I've pulled 1A from the CPU and SYSTEM fan headers and didn't see any big spike in board temp (checked with IR thermometer). Don't try this with the cheaper IP35-V.
You can wire the two 0.20A fans in parallel to the SYSTEM fan header if you want the board to control the speed of those fans. Use 3 pin settting instead of the default 4 pin in the BIOS. With on-board fan control enabled, all fans connected to the CPU and SYSTEM fan headers will only run at full speed when the CPU temp exceeds a preset number. This reduces stress on the output devices and case noise level when the PC is not under full load.
Cheers, Serpent. I am running all three fans now with the 3 pin BIOS setting. Haven't tried connecting the two Scythe case fans in parallel, so I will give that a try.
Originally posted by: bassjunkie
Oh i was also thinking of the Crucial Ballistix 2GB DDR2 PC2-8500C5 or the Tracer version but i assume the Tracer is the same as the standerd but with funky lights.. i will read into these before buying but which would you suggest, they are all in my price range but the OCZ are most exspesice by a good 25 pound but the cheapest there is OCZ 2GB PC2-8500C5 1066MHz SLI-Ready Edition.. i assume not having SLI will not matter.
Unfortantly there isent any uk style http://www.newegg.com other than overclockers.co.uk that have a large slection of ram, i did just want 900 or 1000mhz ram but its prooving hard to find, im a G.skill man myself but i cant find any rated higher than 800mhz in the UK so my options are very limited..
Mehh newegg Pwns overclockers on selection.
Originally posted by: surisshh
Hey guys!i`m planing to buy a ip35-e mobo now and a quad penryn when will appear it. My question is if this mobo are native suport for penryn whitout update bios and the second question :this mb will boot whit my adata vitesta extreme kit at 2.0v voltage?
Originally posted by: kknd1967
Please HELP!
I have been using the motherboard without any problem for 4 months. After vacation, I tried to wake up the machine from sleep and I got blank screen, with my 8800GT fan running at high (which should only happen for the first 1~2 sec after any restart).
I did a hard restart, same problem and there is even no dual boot I typically experienced. Only all the fans are running as normal.
Clearing CMOS, unplug PSU does not help either...
Last time when I had memory problem, it hang up after dual boot. This time, it won't even do that
Is the motherboard dead? btw I did not do any OC on this machine.
Originally posted by: RFV
Abit have removed the IP35-E from the global main webpage, in it's place sits the inferior IP35V which looks cheap, ugly and on looks alone I would not want to buy one. Abit must be crazy if they are killing off IP35-E, this board has become something of a cult classic for overclockers on a budget, I suspect the IP35-E performance may have been too good and possibly detracting from the sales of higher end Abit boards. Are we now all doomed to buy Asus boards to get our cheap overclocking kicks .... shame on you Abit for punking out!