AMD Burton current temp ???

[RayThunderEarth]

Hi all

Yesterday my pal came to me and said that his comp is too hot. He check his cpu temp around 57-59 Celcius. He using AMD Burton 2800 and using cpu fan Volcano 7+.
Is this temp too hot or its suppose to be for burton.

 

[EeyoreX]

Is it stable? If so than it is fine. My Barton 2800+ runs at about 53-55 C under load. Some people claim these temps are "unacceptable" but, as I mentioned, if the PC is stable you won't have any trouble and everything is fine. If you starte getting instability and crashes, then worry.

\Dan

 

[nick1985]

a burton core? COOL! never heard of that! is that like 10000000mhz FSB?

 

[Corporate Thug]

bah, if you are under 65C there is no problem

 

[wetcat007]

Should be fine stay away from Thermaltake, and get a Thermalright, it'll get u much better temps

 

[HiTek21]

Got my Barton 2500+ OCed to 2200MHz and its running 40 idle and around 49 - 52 under full load. Using Alpha 8045 w/ Vantec Stealth fan. My mobo temps are around 30c

 

[Ardan]

Well that is certainly high compared to mine and it shouldn't be a problem but I personally would find it a problem. I usually don't like my temps up that high. In several apps, it says my new 2500+ Barton is at 94 F while idling...and at 98 F under load. I thought that was incredible so I measured using my own external tools and it truly is at that temp around there.

I just got an Abit NF7-S (Rev 2), Barton 2500+, Arctic Silver Ceramique, Smart Fan II, and the Antec SLK3700AMB with a front 120x120x25mm case fan (rear one is standard) from Thermaltake as well. Oh yea, can't forget about the SLK-800(A)!

I put the Ceramique on a 1600+ that used to idle at 112 F and now idles at 104 F. I'm so glad I bought it!

 

[Corporate Thug]

ardan, whats bios are u using?

 

[TheCorm]

My Athlon 1ghz used to get up to 68c under load thanks to the crappy Neng HSF I had on it (that was supposed to be able to handle up to a 1.4ghz Athlon)....that CPU is still working now....although I did replace the HSF before I sold it on.

 

[Maddscientist]

My barton runs 40c idle 47 Full load @ 3.1ghz

Cheers! Hope that helps you figure out your heatsink\system fans\heating compound sucks monky nuts.

 

[Ardan]

Originally posted by: shady06
ardan, whats bios are u using?

I'm using 17. I just played a few games and the temp is 100.
This is Rev 2.0, as I think I stated.
The room temperature also never ever goes above 72 degrees. It isn't upstairs, where it tends to be much warmer.

 

[marks70]

Originally posted by: Maddscientist
My barton runs 40c idle 47 Full load @ 3.1ghz

Cheers! Hope that helps you figure out your heatsink\system fans\heating compound sucks monky nuts.

Your claims of running your Barton at 3.1ghz is a bunch of monkey nuts. There is NO WAY you have it running at that speed.

 

[RayThunderEarth]

yes my pal comp is stable. but this his temp really annoying. I think I must tell him to change his case or place fans on his case. maybe this will work D

 

[RayThunderEarth]

yes my pal comp is stable. but this his temp really annoying. I think I must tell him to change his case or place fans on his case. maybe this will work D