It will only turbo to 4Ghz on 1-2 core usage usually. Anything above that kind of load and it will drop down. My 1700 usually sits at 3.2Ghz.My 1800x just doesn't like H.265. when using H.264 it now gets up to 75-76% usage. I also noticed its not turboing up to 4.0Ghz from the 3.6Ghz.. Also what is Ftpm in bios for cpu?
It will only turbo to 4Ghz on 1-2 core usage usually. Anything above that kind of load and it will drop down. My 1700 usually sits at 3.2Ghz.
Are you on High Performance power saving mode? Just trying to narrow differences down.
So I got the Taichi up. Booted into BIOS (Forgot to check the version), set to 4000 and 3200 ram, and everything else auto. Its installing windows to my M.2 now.
Maybe I should have done windows before I overclocked, just feeling lucky.
Well, I got windows installed, and the drivers, and was some apps, and when BOINC started running it was not all 8 cores@100% (4 ghz)
So I am going to 1.94a bios, and lets see what happens.
OK, up on 1.94a, so what LLC level should I use ? I picked 3 since it was in the middle. Running 4 ghz, all cores 100%load on BOINC 90c (really 70c) I will let it run this way for a while. 1.3875 vcore.
Memory no problem@3200 14,14,14,34
I just worry about the temps. With water cooling, and 4 fans in push/pull mode (2 of them high speed) as you can see, at 1.42 vcore I am at 93c (73 real I think) And I would really like to be in the 60's. Level 3 LLC ATM. I don't remember if there was a LLC mode for NB.set CPU LLC to "Mode 3" and NB LLC to "Mode 2" just to see how it would affect voltages at load. didn't really do a whole lot, but I can't get stable 4ghz without meeting 1.4v in BIOS (actual voltage slightly less) so I think that's a wrap on that.
MSI taking their time with BIOS upgrades... better be worth the wait.
Did you try the 4k sample I linked with the settings to try?My 1800x just doesn't like H.265. when using H.264 it now gets up to 75-76% usage. I also noticed its not turboing up to 4.0Ghz from the 3.6Ghz.. Also what is Ftpm in bios for cpu?
Just a thought... Ryzen at stock is VERY power efficient, and cool, but when you OC, and raise vcore, it gets REALLY hot, and fast. I have 2 now, so I can tell. I can't get my 1700x higher until I get a new cooling device. it does 3750@1.35 vcore, and runs 77c with a 212 evo and 2 fans in push/pull
the paste that comes with a CoolerMaster device. From the 212 EVO or the 612-2Which thermal paste are you using?
Noctua NH-D15 AM4 edition comes with kit alreadySo, question, what version and where can you get a Noctura (I think its D15 or something) that comes with the AM4 bracket ? I have given up on Coolermaster, and the H100i from Corsair is also sub-par IMO.
Downloading it now,will give it a try in 20 mins or so.Did you try the 4k sample I linked with the settings to try?