Another P4 1.6A overclocking success story - 2.4 GHz

[WheelsCSM]

I just ordered my 1.6A and a P4S333 from NewEgg two days ago and it hasn't shipped yet. I can't wait to get that baby in. I was an AMD guy, but the possibility of 2.4 GHz and a 512K L2 cache was too tempting. I also want to see about this "legendary" Intel stability (never had any probs with my VIA/AMB 800 untill it died 2 days ago, probably cause I o/c'd it too high and ran it pretty hot). The AVC Sunflower looks like a tempting add-on from what I am seeing, maybe in a couple weeks I'll pick up one of them too. I think I have seen in a few places that people are just using the heatsink from the Sunflower with the Intel retail fan. I could be wrong though. SHIP MY STUFF NEWEGG!!!

 

[bonkers325]

<< I haven't had that kind of luck. My most stable has been 2.7 on a 2.2. I hit 2.77 but not stable.

Hey P4266 users, did you change the jumper that upped the voltage to your ram on the motherboard?

I have a sneaky suspicion its my kingston pc2700 ram thats the bottleneck. >>



yes
ddr 2.6v
max cpu voltage is 1.775

 

[Daovonnaex]

<< The only way the P4s can reach that speed is with DDR, and this makes the P4s perform worst than they did before at the same speeds. >>


Not true. The current world overclocking record of 3808 MHz was done on an ABIT TH7II--an i850 chipset based mainboard. The great thing about overclocking RDRAM is that latency goes down as frequency goes up.

 

[prontospyder]

Anyone know whether the MSI 645 will work with standard power supplies like the Asus boards or it needs special P4 power supplies?

 

[acejj26]

the MSI board does not have the 4-pin molex connector on-board....only Asus does right now with their EZ-Plug....you'll need a P4-ready power supply to power the board

 

[prontospyder]

Thanks!

 

[Slacker]

I received my 1.6a from googlegear today, it is a malaysia chip, using it right now at 145fsb 2320mhz it wouldnt post at 150 even at 1.7volts , but that may be the motherboard, it is running around 46c at 1.65v , 4114 in 3dmark2001 up from 3500 , very nice scores in sandra, beats all of the comparison systems except the 850chip mem bandwidth test, I have 2175mbps mem bandwidth 850/ddr gets 2450.

I have run 3dmark 2001 many times, and played some heavy Q3, both of those programs are good at crashing unstable overclocks, everything is looking good so far I would have liked to get 150mhz cpu fsb for 2.4ghz and memory at 150 for 300 ddr (I have DDR333 memory) but I am not going to worry about 80mhz on the cpu and 43mhz on the memory.

Is the 1.6a the new DANCING QUEEN I say YES!!

 

[John]

<< very nice scores in sandra, beats all of the comparison systems except the 850chip mem bandwidth test, I have 2175mbps mem bandwidth 850/ddr gets 2450.
>>



Ouch. My XP1800+ @ 145FSB scores 2131/2013 in Sandra 2002. Look like the P4 using DDR is of no benefit at the same FSB as an Athlon. However, I like the idea of taking a 1.6GHz NW to 2.1+GHz for very little cash.

I am still tossing the idea around of making the move to the darkside.

 

[Slacker]

Hehe, I could drop my fsb a little and pump up the memory ratio, when I had it clocked at 180 (360DDR) I got 2700+mbps

 

[Slacker]

<a target=new class=ftalternatingbarlinklarge href="http://home.cox.rr.com/xslackerx/Sandra%20Tests.html">Here is a link to screenshots of the sandra memory, multimedia, and cpu math benchmarks
</a>

 

[JellyBaby]

<< I am still tossing the idea around of making the move to the darkside. >>

Do it John and help restore order throughout the galaxy.

I plan to but first Nvidia must kindly release some GF4 goodness...preferably 4200 goodness.

 

[Slacker]

I am definitely going to upgrade my video card soon, I have a geforce2 gts and get 4114 in 3dmark2001 with the p3/sdram setup I got around 1800 I dont know if I will get a gfource or a g3ti5 , though I think I will end up getting a g3ti5 after the gefource comes out.

 

[JellyBaby]

Yup, that's what I have now (GTS 32 MB). It's still more than handles what I throw at it with the exception of 32-bit combined with high resolutions. Then we hit a memory bandwidth brick wall.

I could get a GF3 but with GF4s just about here why not wait?

 

[PlatinumGold]

wow

i just got my P4 1.6a, malay chip.

i got it at 135 fsb. not a huge OC, but over 2 ghz so i'm not complaining.

here's the kicker, this thing FEELS a lot faster than my XP1700+.

don't ask me why, it just does.

 

[John]

PG, run some benchmarks!

Sandra
3dmark 2001SE
winbench
etc

 

[x86]

<< I'm currently racking my brains as to whether to go with a 2000XP + KT266a or a P4 1.8A/2.0A GHz + 845D rig and these success stories are really luring me toward Intel. But what I'm really after is that legendary stability than Intel's motherboards provide. I'll tell you what, 1 month ago I wouldn't have even considered an Intel rig. My, how things change... >>



Intel rigs are more stable. It isn't "legindary".

-x86

 

[x86]

<< wow

i just got my P4 1.6a, malay chip.

i got it at 135 fsb. not a huge OC, but over 2 ghz so i'm not complaining.

here's the kicker, this thing FEELS a lot faster than my XP1700+.

don't ask me why, it just does. >>



It is the subconscious effect of OCing.

By the way, what MB? What frequency? All of this OCing is getting me dizzy.

-x86

 

[PlatinumGold]

ya, i'll run some benchmarks as soon as i get a chance.

MB, MSI Ultra 645 (plain jane board, no NIC, no nothing but SWEET). 2 256 MB Corsair 2400 ram.

 

[ahfung]

I got my 1.6A running at 2.4GHz. It needs about 1.65-1.70V. With retail heatsink the temperature is almost 55C with Prime95 looping. Can't really complain about this since I can finally get rid of high pitch fan whining from my TB1.4 rig.

At 2.4GHz (With GF3 225/515) I did a few benchmarkings:

CPUmark99: 150

3D Mark 2001 SE (default): 8449

At 2.48GHz

CPUmark99: 154

3D Mark 2001 SE: 8550

 

[RobSan]

Regarding the MSI, and most other P4 motherboards, you can buy a simple Molex to P4 12v adapter for less than $10 and keep your present ATX power supply. I picked up a couple at CyberGuys and I think they were $7.95.