Any AT'ers with the XP 1700+/1800+ T-Bred B's yet?

[bgeh]

Originally posted by: Assimilator1
You would have to break some bridges on an XP1800 to get multipliers higher than x12.5.
An easier though more expensive option would be to use the XP2100 which starts off at x13

Snatchface
Nice overclock for a modest voltage ,high 50's is getting somewhat on the high side for cpu temps but they vary from mbrd to mbrd so its hard to be sure.
What is your case temps?

 

[bgeh]

Originally posted by: shady06
DAMN, i just tried to oc again and when windows loads now, it says profile has been corrupt. gotta reformat again

happens to us all the time. my win xp locked up countless times. then it would give the 'please reactivate your windows' message. called the nearest customer service centre in singapore. did it 7 times in 3 days.

 

[bgeh]

anyone else with these chips?

 

[Shimmishim]

let this thread die!!!!

you know... there's a thread in the hot deals forum that's almost at 750 posts... not bad for a hot deal thread huh?

but reading.. it's mostly people trying to get help with the product... dunno if you can really consider it a hot deal, right?

 

[dionx]

i got my ram in today.

so far, 200x11.5. i think ill stick with this since cpu temps are under 40 which i like.

 

[bgeh]

Originally posted by: Shimmishim
let this thread die!!!!

you know... there's a thread in the hot deals forum that's almost at 750 posts... not bad for a hot deal thread huh?

but reading.. it's mostly people trying to get help with the product... dunno if you can really consider it a hot deal, right?

then let it die

 

[Corporate Thug]

Originally posted by: dionx
i got my ram in today.

so far, 200x11.5. i think ill stick with this since cpu temps are under 40 which i like.

is this air cooled?!?!? what is the serial on the chip???

 

[bgeh]

you know... there's a thread in the hot deals forum that's almost at 750 posts... not bad for a hot deal thread huh?

i don't know about that...but then again, i don't go there because it doesn't bring any use to me
i go there once in a while and see super deals there
you guys are so lucky

 

[The Sauce]

For you guys getting the HDD corruption - are you overclocking in large increments or something? Or overclocking the FSB too high? I have never had that happen but I only bump the speed 30 or so MHz at a time and test for a day, so my failures usually show up as lock-ups or blue screens during testing. I never get windows boot failures if careful enough. Sounds like a PITA.

 

[dionx]

Originally posted by: shady06

Originally posted by: dionx
i got my ram in today.

so far, 200x11.5. i think ill stick with this since cpu temps are under 40 which i like.

is this air cooled?!?!? what is the serial on the chip???

air cooled and here is a pic of the serial on the chip Text

 

[Assimilator1]

You lucky git!

I must have one of the poorsest Tbred Bs!

 

[Ziptar]

Well, the two I ordered from newegg have been delivered.. can't wait to get home and check them out...

 

[Ziptar]

Got'em!!! OEM AXDA1800DLT3C from Newegg.. They are both JIUHB 0304MPMW, I have seen a couple of threads saying that it looks like the AXDA1800DLT3C JIUHB is going the next sweetie!! Wish me luck trying for 16 *133 on my Tiger MP!!

 

[Corporate Thug]

Originally posted by: dionx

Originally posted by: shady06

Originally posted by: dionx
i got my ram in today.

so far, 200x11.5. i think ill stick with this since cpu temps are under 40 which i like.

is this air cooled?!?!? what is the serial on the chip???

air cooled and here is a pic of the serial on the chip Text

d00d, i have the exact same ship. i have a hunch that my XMS is fvcked up, i'm gonna run memtest when i get back

 

[Shimmishim]

Originally posted by: Ziptar
Got'em!!! OEM AXDA1800DLT3C from Newegg.. They are both JIUHB 0304MPMW, I have seen a couple of threads saying that it looks like the AXDA1800DLT3C JIUHB is going the next sweetie!! Wish me luck trying for 16 *133 on my Tiger MP!!

exact same ones i have...

looks like newegg has JIUHB DLT3C's

 

[adeno]

Looks like SVC has a stock of 0307 VPMW xp1700+ JIUHB DTL3C chips.. who wants to bite?

clicky here

 

[Shimmishim]

Originally posted by: adelacru
Looks like SVC has a stock of 0307 VPMW xp1700+ JIUHB DTL3C chips.. who wants to bite?

clicky here

svc is only about ..... 2 months behind excaliber

they had the 0307's WAY BACK

 

[adeno]

Yep.. true. I've heard a lot of good about VPMW though.. oh well (plus excaliberpc's price is around $15 less)

 

[Links4me]

I finally got my NF7-S V2.0 and OCZ PC3200EL mem last nite.....so of course I had to stay up late to put the machine together. I'm running my JIUHB0311 XPMW 1838mhz (11 x 166), no tweaks to anything else....yet and it is at 47degrees at full load (prime95 running). I'm still short one case fan, so I'm gonna wait until I get that in before proceding further. I bumped the bios to 4/10/2003 and popped off the n-bridge cooler and added some as3. I'm using the Thermalright SLK-700 w/ TMD YS-Tech fan.....more stuff to follow.....

 

[bgeh]

Originally posted by: Links4me
I finally got my NF7-S V2.0 and OCZ PC3200EL mem last nite.....so of course I had to stay up late to put the machine together. I'm running my JIUHB0311 XPMW 1838mhz (11 x 166), no tweaks to anything else....yet and it is at 47degrees at full load (prime95 running). I'm still short one case fan, so I'm gonna wait until I get that in before proceding further. I bumped the bios to 4/10/2003 and popped off the n-bridge cooler and added some as3. I'm using the Thermalright SLK-700 w/ TMD YS-Tech fan.....more stuff to follow.....

we'll be waiting for your results

 

[Corporate Thug]

Originally posted by: adelacru
Yep.. true. I've heard a lot of good about VPMW though.. oh well (plus excaliberpc's price is around $15 less)

they are 74.99 now

 

[touchmyichi]

Whats the best place to order a 1700+ for under 50 bucks, newegg or googlegear, or is there a better place?

 

[Corporate Thug]

newegg

 

[Ziptar]

Dammit! Killed one of mine cutting the bridges.. any way to save it??

 

[touchmyichi]

we're not going to let this record setting thread die are we?