It was late (very early this morning) and I did something stupid!
With my shiney new AMD 1300/100 on my trusty, ultra-stable Asus A7V rev. 1.02 I was reliably overclocking the FSB at 110Mhz and running Win2K rock solid at 1.43GHz. In a foolhardy moment of passion, I bumped the FSB, via the BIOS, to 120MHz and rebooted. Nothing came up and about 30-seconds later the heat alarm came on so I immediatly cut power to the system. I went to bed.
I woke up early this morning, opened the case and took the A7V off "jumper free" mode and set it for 100MHz FSB and 10x on the multiplier (the CPU is unlocked from the factory) which should be 1.0GHz, nicely underclocked. I give it power and... NOTHING still! I figure I've fried the CPU, and while extremely pissed at myself, I dug out the 800MHz that I replaced, set the appropriate jumers/switches, give it power and... NOTHING again!
Did I somehow fry the A7V? At 120MHz FSB, it drops to 1/4 on the PCI/AGP bus, so I don't think I fried any components.
Is there are "BIOS reset" jumper or purge anywhere on an A7V?
Does anyone have ANY ideas?
With my shiney new AMD 1300/100 on my trusty, ultra-stable Asus A7V rev. 1.02 I was reliably overclocking the FSB at 110Mhz and running Win2K rock solid at 1.43GHz. In a foolhardy moment of passion, I bumped the FSB, via the BIOS, to 120MHz and rebooted. Nothing came up and about 30-seconds later the heat alarm came on so I immediatly cut power to the system. I went to bed.
I woke up early this morning, opened the case and took the A7V off "jumper free" mode and set it for 100MHz FSB and 10x on the multiplier (the CPU is unlocked from the factory) which should be 1.0GHz, nicely underclocked. I give it power and... NOTHING still! I figure I've fried the CPU, and while extremely pissed at myself, I dug out the 800MHz that I replaced, set the appropriate jumers/switches, give it power and... NOTHING again!
Did I somehow fry the A7V? At 120MHz FSB, it drops to 1/4 on the PCI/AGP bus, so I don't think I fried any components.
Is there are "BIOS reset" jumper or purge anywhere on an A7V?
Does anyone have ANY ideas?