Originally posted by: Mr Vain
Guys please contribute and share put in the specs that work best for you.
Will do!
Mainboard
4CoreDual-VSTA
E6300
No volt mods
VIA drivers [5.12A]
Boot Stable [300FSB/112.5PCIe/34.78PCI]
Gaming/Benchie Stable [312.5FSB/117.5PCIe/34.78PCI] using
SetFSB v2.0.b.16a
CPU-Z voltage 1.248~1.264
Air cooling (3x120mm)
BIOS 1.80c
CPU Configuration
Overclock Mode [CPU,PCIE Sync.]
CPU Frequency (MHz) [300]
PCIE Frequency (MHz) [112.5]
PCI Frequency [34.78MHz]
Spread Spectrum [Disabled]
Boot Failure Guard [Enabled]
Ratio Active Value 7
Max CPUID Value Limit [Disabled]
No-Execute Memory Protection [Disabled]
Chipset Configuration
DRAM Frequency [266MHz (DDRII533) ]
Flexibility Option [Disabled]
DRAM CAS# Latency [3]
DRAM Bank Interleave [Auto]
Precharge to Active (Trp) [Auto (3)]
Active to Precharge (Tras) [8]
Active to CMD (Trcd) [Auto (3)]
REF to ACT/REF to REF (Trfc) [Auto]
ACT (0) to ACT (1) (Trrd) [Auto]
Read to Precharge (Trtp) [Auto]
Write to Read CMD (Twtr) [Auto]
Write Recovery Time (Twr) [Auto]
DRAM Bus Selection [Dual Channel]
DRAM Command Rate [1T]
?
Advanced Memory Configuration
[Untouched]
?
Advanced Host Configuration
Pipeline DRQCTL [Enabled]
GTL Control [Auto]
DRAM Voltage [High]
AGP Voltage [High]
Primary Graphics Adaptor [AGP]
AGP Mode [8x]
AGP Fast Write [Enabled]
AGP Aperture Size [256MB]
AGP Staggered Delay [None]
AGP GADSTB Output Delay [None]
AGP 3.0 Calibration [Auto]
AGP 3.0 DBI Function [Auto]
DBI Output for AGP Trans. [Auto]
DBI Output for FRAME Trans. [Auto]
V-Link Speed [Normal]
PCI Delay Transaction [Disabled]
IDE Drive Strength [Normal]
PCIE Downstream Pipeline [Disabled]
OnBoard LAN [Disabled]
OnBoard HD Audio [Enabled]
Front Panel [Enabled]
CD-In [Enabled]
Bus No. [02]
Echo TPR Disable [Auto]
Video
Palit 7600GT AGP 256MB @ 700/825 (1650)
XtremeG Driver [167.71]
3DMark06
4174
-Hlafordlaes