At the first reboot during a fresh WinXP install I realized I had an incorrect jumper setting on the P4S533 since I could hear the helpful little voice through the case speaker. I powered down the system during this reboot to switch the jumper. Upon powering up again I was greeted with the following message:
The system intruded, chassis opened or tempered [sic] before. Please check the system.
I've done everything I can think of (apart from taking everything out of the case again) but I can't get this message to disappear. I can click "OK" and exit from the BIOS but the error message reappears every time I boot the system. The chassis intrusion header is capped with a jumper per the manual's instruction and as set by the factory. Please, help me enjoy my new rig!
-z
The system intruded, chassis opened or tempered [sic] before. Please check the system.
I've done everything I can think of (apart from taking everything out of the case again) but I can't get this message to disappear. I can click "OK" and exit from the BIOS but the error message reappears every time I boot the system. The chassis intrusion header is capped with a jumper per the manual's instruction and as set by the factory. Please, help me enjoy my new rig!
-z