I can't get the JMicron IDE connector to accept any hard drives. It sits during POST saying "Detecting drives..." for several minutes and then finally gives up. If I plug a DVD drive in instead, it instantly shows the name of the drive and boots up.
Nothing seems to change these facts; I tried different cables (both ATA 133 I think), DVD drives, hard drives, master/slave jumper settings, BIOS settings. I also used AFUDOS.exe to flash to BIOS 0804. The hard drives generate noise and heat, and the enclosure I tried shows both the "IDE active" and "IDE power" lights on, but never are recognized. The HD's I tried were 100 GB and 20 GB Western Digital 7200 RPM's.
Between this JMicron bug and the crackling sounds on this board, I know what the AFU stands for!!
Nothing seems to change these facts; I tried different cables (both ATA 133 I think), DVD drives, hard drives, master/slave jumper settings, BIOS settings. I also used AFUDOS.exe to flash to BIOS 0804. The hard drives generate noise and heat, and the enclosure I tried shows both the "IDE active" and "IDE power" lights on, but never are recognized. The HD's I tried were 100 GB and 20 GB Western Digital 7200 RPM's.
Between this JMicron bug and the crackling sounds on this board, I know what the AFU stands for!!