[FONT=Arial, sans-serif]Hi. My motherboard is an Asus P6T Deluxe V2, inside an Antec DF-85 tower case. The tower has three USB 2.0 ports on the front panel. I connected two of them to the motherboard via Asus' blue USB Q-Connector. I want to use the the third USB 2.0 cable from the tower's front panel, but according to the Asus motherboard manual, I need another blue USB Q-Connector. Can I just connect the USB 2.0 cable directly into the USB port on the motherboard without another blue USB Q-Connector?[/FONT]
[FONT=Arial, sans-serif]
[/FONT][FONT=Arial, sans-serif]note: USB 2.0 cable from the tower's front panel description: connector is black with 4 pin holes; fifth pin hole is factory-covered (not actually a pin hole). Starting with the first pin hole on the left is +5v, second pin hole is D-, third pin hole is D+, fourth pin hole is Ground.
[/FONT][FONT=Arial, sans-serif]
I only had to use one blue USB Q-Connector because the front panel's USB 2.0 cables are actually 2-in-1.[/FONT]
[FONT=Arial, sans-serif][/FONT][FONT=Arial, sans-serif]Thank you[/FONT]
[FONT=Arial, sans-serif]
[/FONT][FONT=Arial, sans-serif]note: USB 2.0 cable from the tower's front panel description: connector is black with 4 pin holes; fifth pin hole is factory-covered (not actually a pin hole). Starting with the first pin hole on the left is +5v, second pin hole is D-, third pin hole is D+, fourth pin hole is Ground.
[/FONT][FONT=Arial, sans-serif]
I only had to use one blue USB Q-Connector because the front panel's USB 2.0 cables are actually 2-in-1.[/FONT]
[FONT=Arial, sans-serif][/FONT][FONT=Arial, sans-serif]Thank you[/FONT]