ATI tray tools version 1.2.6.930 out

[WelshBloke]

Dont know if this had been posted couldnt find it on search.

Supports voltage adgustment (gpu and mem) and fan control.

I got it using the update function

 

[Mango1970]

from where please? seem to only find the older one.

 

[Ulfhednar]

OMFG LINK OR BAN!

 

[Bull Dog]

Well you can download the old version, install it and then find the update button

 

[Ulfhednar]

Originally posted by: Bull Dog
Well you can download the old version, install it and then find the update button

Aye, I just did. Attempting OCs now.

 

[Bull Dog]

Or you can download from me (ATI Tray Tools v1.2.6.940 setup ) (temp mirror)

Edit updated from .930 to .940

 

[Ulfhednar]

The artifact scanner and built-in benchmark still crash me just like ATI Tool whereas 3D Mark 05 and 3D Mark 06 run perfectly, it must use the exact same methods.

At least I don't need to run ATI Tool alongside ATI Tray Tools now though.

 

[BrokenVisage]

Awesomenessfinallywtfbbq! Will test it when I get home!

 

[LittleNemoNES]

Oh man I read ATI tool for some reason

Damn I want so badly to easily OC both cards. Also, I wish I could ditch CCC but cant since it's a requirement for crossfire.

 

[vmsein]

Originally posted by: Bull Dog
Or you can download from me (ATI Tray Tools v1.2.6.930 setup ) (temp mirror)

Thank you very much for setting up the link.

 

[the Chase]

Originally posted by: vmsein

Originally posted by: Bull Dog
Or you can download from me (ATI Tray Tools v1.2.6.930 setup ) (temp mirror)

Thank you very much for setting up the link.

2nd that.

 

[WelshBloke]

Originally posted by: the Chase

Originally posted by: vmsein

Originally posted by: Bull Dog
Or you can download from me (ATI Tray Tools v1.2.6.930 setup ) (temp mirror)

Thank you very much for setting up the link.

2nd that.

sorry about that, thought youd all be able to find it with the update button!

 

[Polish3d]

Hooray!!!! Finally a potentially good alternative to ATI Tool

 

[WelshBloke]

as an apology for not posting link heres the change log:


1.2.6.930
[+] Added configuration dialog for Overdrive 3. You can use it if you don't want to overclock your board on low level or
if you have a problem with low level overclocking. Remember this option will be active only if your video board support
Overdrive version 3 and ATI HotKey poller service is started.
[+] Added overclocking support for X1300/X1600/X1800/X1900. Memory overclocking for X1300 doesn't work in this release. Also
remember that you must disable ATI HotKey poller if your board can operate in 2D/3D mode or your clocks always will be
resets to ATI default clocks. Try do not overclock your board while any 3D games are active. Do it before launching game via
game profiles it is a safest way.[*] Updated color correction hotkeys, to support new color correction formula[*] Updated 3D renderer and benchmark module.
[F] Fixed situation when 3D renderer shows artefacts after using benchmark module.
[+] Added support for Avivo Colors correction. Hue/Saturation will only work on R5xx video boards. There
are no way to activate them for old video board, so do not ask me about it.[*] Updated auto FAN control functionality for R5xx boards.[*] Updated system information module. Added basic information about Overdrive support.
[F] Fixed broken OSD functionality for Direct3D8 games and applications.
[F] Fixed detection of current 3D profile with no GI option included[*] Now Shared memory information about FreeVideo and Texture memory will be updated only if 3D game
or application is active and OSD enabled.[*] Updated FlashOSD module. Added voltages information for X1xxx video boards and ASUS Video boards with FinTEK sensor
(like 9600XT/9800XT)
[F] Fixed rendering procedure in FlashOSD module for some of non-alpabetical characters.
[F] Fixed bug when "Scale image to panel size" option doesn't work in certain situations.
[+] Updated support for HDTV modes. Added a few new modes. Only supported modes can be adjusted.
Note some modes can be disabled in certaint situation, such as display rotation
[+] Added support for "Perserve Aspect Ratio" option in Display module. If supported by LCD or DFP display.
[F] Fixed bug with hotkey for decreasing contrast in color correction procedure.
[+] Added GPU and Memory Voltage control procedure for X1600/X1800/X19xx (if supported by hardware)[*] Monitoring Graphs window now will be automaticaly reopened after suspend mode if it was active before entering
into Suspend mode.
[+] Added option to Force TV Detection.If you are using an older TV or one that has non-standard inputs that
may not be automatically detected, use Force TV Detection.
[+] Added test support for X1300/X1600/X1800/X19xx Radeon video boards into TV Out/Display module.[*] Improved TV Out support for mobility chips. ATT has partial support for mobility chips, so do not
expect a lot [*] Updated Core names database. Added information about RV570/RV535 chips.
[+] Added option to automatically shutdown "ATI HotKey Poller" for R5xx board. If you want to use overclocking functions in
ATI Tray Tools for those video boards, you must always disable "ATI HotKey Poller" service to prevent from resetting
clocks and voltages to default state.
[F] Fixed FlashOSD functionality corrected wrongly shown GPU/Memory speed for R5xx video board in 3D mode.
[+] Added localization support. Big thanks to all who helped to translate ATI Tray Tools into other languages.
[+] Added new command line parameters:
/LDSD - Load "Default Single Display" profile
/EXD - Turn Extended Desktop On/Off
[+] Added an ability to skip overclocking at start up. Just press left CTRL button while windows is loading.

 

[the Chase]

It's all good. Thank's for the heads up in the first place.

Seems to work good except anyone else not able to change their memory voltage on the x1800/1900 cards? (x1800XT in my case).

 

[Auric]

ATI should sack their entire CP team and give Ray Adams a gajillion dollars to license ATT and/or higher him as manager of a new team. Seriousry, ATT is a compelling reason to buy ATI cards rather than NVIDIA.

 

[vmsein]

Does anyone know how to overclock both cards in a Crossfire setup using this tool, or is this not supported in this release?

 

[Ulfhednar]

Originally posted by: Auric
ATI should sack their entire CP team and give Ray Adams a gajillion dollars to license ATT and/or higher him as manager of a new team. Seriousry, ATT is a compelling reason to buy ATI cards rather than NVIDIA.

I agree, Catalyst Control Centre is bloody abysmal at best.

 

[josh6079]

Does it have a memory timing lock feature like the new ATI Tool? Otherwise how do we know if when increasing the memory frequencies it isn't simultaneously loosening the timings?

 

[Ulfhednar]

Originally posted by: josh6079
Does it have a memory timing lock feature like the new ATI Tool? Otherwise how do we know if when increasing the memory frequencies it isn't simultaneously loosening the timings?

There's a memory timings manager built-in to ATI Tray Tools.

 

[the Chase]

Originally posted by: Auric
ATI should sack their entire CP team and give Ray Adams a gajillion dollars to license ATT and/or higher him as manager of a new team. Seriousry, ATT is a compelling reason to buy ATI cards rather than NVIDIA.

Heh- I just came back to post that ATI better start paying Ray Adams for this tool because especially with this new version I'm a lot happier with my card than if it didn't exist. And I have an axe to grind with ATI but still happy with the card/voltage softmods.

 

[gi0rgi0]

So to use this this do you delete ati ccc and then load this up instead ?

 

[josh6079]

ATT benchmark results on stock X1900GT.

 

[the Chase]

Originally posted by: josh6079
ATT benchmark results on stock X1900GT.

What benchmark is that? Never have seen it before. Did you get the memory voltage to adjust using the new tray tools? I can set new values in the field- but when I hit the APPLY button it just reverts back to the stock memory voltage.

 

[josh6079]

Originally posted by: the Chase

Originally posted by: josh6079
ATT benchmark results on stock X1900GT.

What benchmark is that? Never have seen it before. Did you get the memory voltage to adjust using the new tray tools? I can set new values in the field- but when I hit the APPLY button it just reverts back to the stock memory voltage.

Yeah, ATI Tray Tools. Memory clocks are working for me. Cat 6.6's.

EDIT: Oh, I thought you meant the frequencies. Yeah, the voltages don't adjust for me either, but hey, 850 on nothing but stock volts is good enough for me.