Audigy 2 ZS pinout

[imported_PanicAttack]

I have an antec p160 case with an audio out on the front. Can I plug it directly into my Audigy2ZS? If so, can someone point me toward a pinout as the users manual is no help. Can't find anything on the website either.

Thanks!

 

[TheStu]

I thought the audigy 2 ZS came with the cute little expansion bay thingy with USB ports and what not...

 

[imported_PanicAttack]

Maybe your referring to the Platinum or whatever the top ot the line is. Mine is just the OEM card.

 

[Slikkster]

Read this thread...about halfway down is a pinout guide made for someone to hook up the older Live breakout box to a ZS.

http://www.driverheaven.net/archive/index.php/t-51678.html

Also found this is another forum:

The Pin-out on the Audigy 2 are as follows

1 - Analog Ground
2 - Analog Headphone Out Left
3 - Audio Backpanel Mute -- short to ground to mute the backpanel (when headphones are plugged in)
4 - Analog Headphone Out Right
5 - same as #3
6 - Mic input from front panel
7 - key pin (shouldn't be there)
8 - VREF out -- voltage reference for Mic
9 - MIC IN MUTE -- ground when mic isn't plugged in, +12VDC when mic is plugged in
10 - Audio cable detect -- will be ground when headphones are plugged in (not normally used)

 

[imported_PanicAttack]

Slikkster, thanks for the info. Now if I could just ID which are the 10 pins and what their numbers are. It's not printed on the board and there are more than 10 pins coming from the back of the board. Thanks again.

 

[Navid]

http://forums.devhardware.com/showthread.php?t=15584&page=6&pp=15

I have only checked the microphone and it works for me (Audigy2 ZS).