bad order

[human2k]

Originally posted by: Chaotic42

Originally posted by: picott
help me out im a n00b i dont get it

Ok.

There are two possibilities here.

#1- You have a jumper on your motherboard that allows you to select either a 100MHz or 133MHz bus. Yours is set to 100MHz. Your 2400+ processor uses the 133MHz bus. While using the 100MHz bus, you are underclocking it. It is running more slowly than it is supposed to. You need to set the jumper to 133MHz, so that it runs at 2400+ instead of 1800+.

#2- You have an option in your BIOS that allows you to select either a 100MHz or 133MHz bus. Yours is set to 100MHz. Your 2400+ processor uses the 133MHz bus. While using the 100MHz bus, you are underclocking it. It is running more slowly than it is supposed to. You need to set the option to 133MHz, so that it runs at 2400+ instead of 1800+.

He's prolly gonna say, "But I thought its suppose to be 266MHZ".

 

[Sid59]

lol .. still don't get it? call NEWEGG and tell them you got a CPU running at 100 FSB and you don't know how to read your mobo manual to change it to 133 and you want to return it for one that is 133 FSB.

or ..

You post your mobo and go to their website or read your MANUAL and read how to adjust FSB .. or FRONT SIDE BUS.

 

[Chaotic42]

Originally posted by: human2k
He's prolly gonna say, "But I thought its suppose to be 266MHZ".

Shhhhhh!

Don't give him any ideas!

 

[picott]

aw the n00b abuse is startin to hurt

i read the manual last night and found out how to change the bus speed to 133mhz

thx 4 the response guys

 

[arcenite]

You were all a newbie once too y'know ;-)

Bill

Edit: Glad you fixed the problem

 

[Sid59]

Originally posted by: picott
aw the n00b abuse is startin to hurt

i read the manual last night and found out how to change the bus speed to 133mhz

thx 4 the response guys

WOOO !!!!

Originally posted by: picott
i have a kt4ultra

even if my cpu was runnin on the wrong fsb why would the bios say that a 1800+ is my cpu???

now do you know why the wrong FSB would only report 1800+?

 

[ShowdOWN]

ROFLMAO!

 

[picott]

yes i do

 

[ScrapSilicon]

Originally posted by: picott
yes i do

don't let them get to you...everyone starts somewhere..

 

[lenjack]

Reading the manual is a good idea....you should have thought of it sooner.