bartpe problems

[watts3000]

I'm building a bartpe disk using pe builder 3.19 my main purpose of doing this is imaging servers with raid 5 arrays. I have included the ghost 8.0 plug-in and also I've added my broadcom drivers and promise fast track sx 4000 and TX 2000 drivers. I'm testing this out on my home LAN before I attempt to do this at work my problem is the raid drivers even though I've added them to the drivers folder whenever I load up bartpe none of my drives are being recognized. The instructions was to create a folder and add in your storage drivers I've done that and so far I've had no success. I checked the PE log and its writing the following error messages could this be the cause of my problem?



Error: SetupDecompressOrCopyFile() "C:\PEBUILDER319\DRIVERS\SCSIADAPTER\STORAGE\WNET\FASTSX.SYS" to "C:\pebuilder319\burn\I386\SYSTEM32\DRIVERS\FASTSX.SYS" 3: The system cannot find the path specified.
DecompressOrCopy file "C:\PEBUILDER319\DRIVERS\SCSIADAPTER\STORAGE\WINXP\FASTSX.SYS" to "C:\pebuilder319\burn\I386\SYSTEM32\DRIVERS\FASTSX.SYS"
Error: SetupDecompressOrCopyFile() "C:\PEBUILDER319\DRIVERS\SCSIADAPTER\STORAGE\WINXP\FASTSX.SYS" to "C:\pebuilder319\burn\I386\SYSTEM32\DRIVERS\FASTSX.SYS" 3: The system cannot find the path specified.
DecompressOrCopy file "C:\PEBUILDER319\DRIVERS\SCSIADAPTER\STORAGE\WIN2000\FASTSX.SYS" to "C:\pebuilder319\burn\I386\SYSTEM32\DRIVERS\FASTSX.SYS"
Error: SetupDecompressOrCopyFile() "C:\PEBUILDER319\DRIVERS\SCSIADAPTER\STORAGE\WIN2000\FASTSX.SYS" to "C:\pebuilder319\burn\I386\SYSTEM32\DRIVERS\FASTSX.SYS" 3: The system cannot find the path specified.

 

[dclive]

Originally posted by: watts3000
I'm building a bartpe disk using pe builder 3.19 my main purpose of doing this is imaging servers with raid 5 arrays. I have included the ghost 8.0 plug-in and also I've added my broadcom drivers and promise fast track sx 4000 and TX 2000 drivers. I'm testing this out on my home LAN before I attempt to do this at work my problem is the raid drivers even though I've added them to the drivers folder whenever I load up bartpe none of my drives are being recognized. The instructions was to create a folder and add in your storage drivers I've done that and so far I've had no success. I checked the PE log and its writing the following error messages could this be the cause of my problem?



Error: SetupDecompressOrCopyFile() "C:\PEBUILDER319\DRIVERS\SCSIADAPTER\STORAGE\WNET\FASTSX.SYS" to "C:\pebuilder319\burn\I386\SYSTEM32\DRIVERS\FASTSX.SYS" 3: The system cannot find the path specified.
DecompressOrCopy file "C:\PEBUILDER319\DRIVERS\SCSIADAPTER\STORAGE\WINXP\FASTSX.SYS" to "C:\pebuilder319\burn\I386\SYSTEM32\DRIVERS\FASTSX.SYS"
Error: SetupDecompressOrCopyFile() "C:\PEBUILDER319\DRIVERS\SCSIADAPTER\STORAGE\WINXP\FASTSX.SYS" to "C:\pebuilder319\burn\I386\SYSTEM32\DRIVERS\FASTSX.SYS" 3: The system cannot find the path specified.
DecompressOrCopy file "C:\PEBUILDER319\DRIVERS\SCSIADAPTER\STORAGE\WIN2000\FASTSX.SYS" to "C:\pebuilder319\burn\I386\SYSTEM32\DRIVERS\FASTSX.SYS"
Error: SetupDecompressOrCopyFile() "C:\PEBUILDER319\DRIVERS\SCSIADAPTER\STORAGE\WIN2000\FASTSX.SYS" to "C:\pebuilder319\burn\I386\SYSTEM32\DRIVERS\FASTSX.SYS" 3: The system cannot find the path specified.

Well, the directions also said you have to modify the txtsetup.oem file - did you do that?

 

[watts3000]

I saw that but its on excluding drivers in the txtsetup.oem file I don't see how that plays into my problem. Have you added any promise drivers to a bartpe cd before?

 

[dclive]

Well, your error shows it's trying to copy a WNET (Server 2003) directory, and the documentation specifically mentions you must exclude all but the XP driver. So it stands to reason that could be related to your problem. Since it would take you 30 seconds or so to modify the text file like the documentation says you must, why not try it?