- Dec 22, 2002
- 230
- 0
- 71
I was having heat problems after upgrading to an A8N32 and x1900xt w/ an oc'd oppy 170 @ 2.6
Board and cpu load temps in the low 50s
I tried switching 2 of my Yate Loons to 100cfm 120x38 Sanyo Denkes(undervolted with rheobus) for intake and exhaust. That basically fixed my heat problems, but not my noise problem.
Short version: oem Antec Tricool in the bottom on low. Back taped up. 120x38 Delta Low speed Triple Blade on the Si-120 and YL in the front, top, back, and side panel. All hooked up to a Sunbeam rheobus
Temps are as good now as with the side panel off and I can turn down all the fans for quite mode with resonable temps. When I want to game, I just turn them up to 12v on the rhoebus.
Cheezy Slide Show
I'm missing a screen shot. I hit the Pause Break key by accident . What it showed was that when dual priming and using the ccc overclock utility to heat up the gpu, the CPU temp actually dropped to 44.
Idle temps now 37/34 with fans at 12v.
Board and cpu load temps in the low 50s
I tried switching 2 of my Yate Loons to 100cfm 120x38 Sanyo Denkes(undervolted with rheobus) for intake and exhaust. That basically fixed my heat problems, but not my noise problem.
Short version: oem Antec Tricool in the bottom on low. Back taped up. 120x38 Delta Low speed Triple Blade on the Si-120 and YL in the front, top, back, and side panel. All hooked up to a Sunbeam rheobus
Temps are as good now as with the side panel off and I can turn down all the fans for quite mode with resonable temps. When I want to game, I just turn them up to 12v on the rhoebus.
Cheezy Slide Show
I'm missing a screen shot. I hit the Pause Break key by accident . What it showed was that when dual priming and using the ccc overclock utility to heat up the gpu, the CPU temp actually dropped to 44.
Idle temps now 37/34 with fans at 12v.