Best Bug & Tar remover

[PricklyPete]

So what is the best Bug and Tar remover that you guys have used that hasn't caused any damage to the paint? Trying to clean up the Tacoma and there is a bunch of bug debris on the front fascia that just doesn't want to come off. I've tried using some einszett Bug & Tar...but it hasn't quite worked to my expectations.

this is what I used...worked some...but not well enough....

http://www.detailersdomain.com/1zeinszett-anti-insektpre-cleanerbugandtarremover.aspx

 

[PricklyPete]

No one has a favorite?

 

[NutBucket]

http://www.autogeek.net/pinsafscrub.html

Works great for bugs and I haven't noticed any scratches from it.

 

[white]

I use the 3M one, but do so sparingly to reduce the risk of paint damage. It works for me. Plus, I only use it if I really can't get it off some other way.

 

[PricklyPete]

Gracias on the suggestions.

 

[LTC8K6]

Kerosene

 

[MadScientist]

I use a soft bristle brush for the bugs. Like this one: http://www.amazon.com/Carrand-92025-Deluxe-Flagged-Bristles/dp/B000OCH8FO/ref=sr_1_16?s=automotive&ie=UTF8&qid=1280317083&sr=1-16
Walmart has one almost identical to it for $3.49.

For removing tar I use mineral spirits (paint thinner). It will not harm the paint on your car. Do not use any paint thinners that contain acetone, toluene, xylene, or MEK.

 

[SJP0tato]

It might be easier to clay bar it if the build up is bad enough.

 

[PricklyPete]

It might be easier to clay bar it if the build up is bad enough.

I was considering clay baring the whole truck as I have a new one sitting around...but want to give it one more go.

 

[PhoKingGuy]

I was considering clay baring the whole truck as I have a new one sitting around...but want to give it one more go.

I bought this rain-x bug and tar remover from target on a whim because it was on clearance. It surprisingly works really friggin good. You have to spray it on and walk away for a bit though because of the fumes.

 

[Zap]

I've used somewhat concentrated Simple Green for bugs (used to live in a farming community and bugs were a terrible nuisance). I had bought the stuff as a gallon concentrate, and used about 1/4-1/2 the recommended water in the mix. Just sprayed it on and let it sit until almost dry, then spray on some more and wipe. Usually it just all came off right away.

For tar, WD40 works well. Spray it on, wipe it off, then wash the area to remove the WD40 residue.