Ok, here is my problem, I'm trying to build a computer with the following:
Gigabyte GA-P35-DS4 Rev. 2.0 (Stock FW F6)
Intel Q6700 (not OCing)
Crucial Ballistix PC2-8500 (2x1GB - tried populating yellow slots first, then orange slots- no go either way!)
OZC GameXstream 700w PSU (connected 24 pin ATX connector and two 4-pin connectors)
WD 150GB Raptor SATA
Liteon LH-18A1P (IDE) DVD burner
PS/2 kb and mouse.
Ok, here's what is does or doesn't do. . . It beeps at me once and gets up to "Verifying DMI Pool Data. . . . . . " and that's it! I have removed the battery to clear the CMOS and gone into the BIOS to set "Fail-safe defaults" and still will not get past that point.
The MoBo is sitting outside the case on the box so it's not a short. Using the stock HSF and it appears to be mounted correctly. In the BIOS everything seems to be recognosied.
Any ideas? Please.
Gigabyte GA-P35-DS4 Rev. 2.0 (Stock FW F6)
Intel Q6700 (not OCing)
Crucial Ballistix PC2-8500 (2x1GB - tried populating yellow slots first, then orange slots- no go either way!)
OZC GameXstream 700w PSU (connected 24 pin ATX connector and two 4-pin connectors)
WD 150GB Raptor SATA
Liteon LH-18A1P (IDE) DVD burner
PS/2 kb and mouse.
Ok, here's what is does or doesn't do. . . It beeps at me once and gets up to "Verifying DMI Pool Data. . . . . . " and that's it! I have removed the battery to clear the CMOS and gone into the BIOS to set "Fail-safe defaults" and still will not get past that point.
The MoBo is sitting outside the case on the box so it's not a short. Using the stock HSF and it appears to be mounted correctly. In the BIOS everything seems to be recognosied.
Any ideas? Please.