BIOSTAR TA780G M2+
AMD Athlon 64 X2 5400 Brisbane 2.8GHz BE
Crucial Ballistix Tracer 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory - Retail
I was finally able to get the above working with BIOS defaults and after pushing up Mem voltage to 2.06. Deafult Mem timings are at 5-5-5-18 (CPU-Z)
I also have a couple of Patriot Extreme Performance 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory - Retail - PDC22G6400LLK
Adding these causes the system to freeze up intermittently in Vista 32-bit. (Memtest v3.4 ran fine for 5+ hours) What should I bump up the voltage to? What timings should I be using? Should I not try and mix the Crucial & Patriot modules?
I've been away from all this for a long time, so please excuse the almost-newbie questions
Thanks.
AMD Athlon 64 X2 5400 Brisbane 2.8GHz BE
Crucial Ballistix Tracer 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory - Retail
I was finally able to get the above working with BIOS defaults and after pushing up Mem voltage to 2.06. Deafult Mem timings are at 5-5-5-18 (CPU-Z)
I also have a couple of Patriot Extreme Performance 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory - Retail - PDC22G6400LLK
Adding these causes the system to freeze up intermittently in Vista 32-bit. (Memtest v3.4 ran fine for 5+ hours) What should I bump up the voltage to? What timings should I be using? Should I not try and mix the Crucial & Patriot modules?
I've been away from all this for a long time, so please excuse the almost-newbie questions
Thanks.