- Apr 6, 2009
- 19
- 0
- 0
Hey
I have OCed my Q6600 to 3ghz on 1.331vcore. Only other voltages I have changed is RAM to 1.9v, My system passed 10 hours Prime95 and an hour of OCCT Linpack so I would think its stable. My temps at idle are around 24C which is also ok. Only issue is when I do a cold boot, the system will power on, fans will go on and power light will switch on but then after a sec it would all turn off and then back on again and boot into windows without problems. I got a Gigabyte UD3R mobo so if my OC caused the system to not POST then next time I go into the BIOS I would get a warning. I went into BIOS after it has done that and got no warning.
I am not sure what to do, should I increase MCH voltage?
Or could it be my RAM?
I have OCed my Q6600 to 3ghz on 1.331vcore. Only other voltages I have changed is RAM to 1.9v, My system passed 10 hours Prime95 and an hour of OCCT Linpack so I would think its stable. My temps at idle are around 24C which is also ok. Only issue is when I do a cold boot, the system will power on, fans will go on and power light will switch on but then after a sec it would all turn off and then back on again and boot into windows without problems. I got a Gigabyte UD3R mobo so if my OC caused the system to not POST then next time I go into the BIOS I would get a warning. I went into BIOS after it has done that and got no warning.
I am not sure what to do, should I increase MCH voltage?
Or could it be my RAM?