Sorry,
Let me rephrase that:
Gigabyte 6VXE7+.Bios does not have a CPU voltage adjust but there is a 'magic' jumper on the m/board that increases CPU voltage by 10%.I left that jumper at 'default' position.
I've tested another 2 Cel600 same spec(SL4NX) and both ran fine at 900Mhz at 'default' voltage on the same m/board for 18 hours looping 3DMark2000 ver1.1
The intention of this post is to share with fellow forum members that this Celeron spec can reach a certain speed and i did not anticipated to get flamed.I also do not expect 'flamers' to take this figure as proof.I'm surprise the system ran very stable in a tropic enviroment with room temps hovering at 30deg Celcius.All test were conducted using Gold Orb and Alpha FC-PAL35 h/sinks.This will also be my last post for this subject.
Rgds,
Chas