My cisco 1605r does not appear to be getting an IP address from my Internet provider (comcast) via DHCP. Before comcast switched me over to their network (from @home) I had two statics, one I applied to my E0 interface, the other was used for my NAT pool. yesterday, prior to the switch, I configured the router to obtain an IP (E0) but for some reason it would not. As soon as I would plug straight into my nic I received an IP from comcast. I've never done DHCP with my router, I flashed the router yesterday, so the router is definately capable, the config shows that I'm set up for DHCP at E0 but it just won't obtain the IP. I do a "sh int e0" and all it says is ip address assigned via DHCP but it does not have an IP address....any clue? I've applied the IP assigned (via my nic) to the E0 interface for now and I'm getting out, but this IP is going to change weekly so I don't want to have to do this every week if I don't have to (I will if I have to as I have two nics, one in the DMZ so this makes obtaining the IP pretty simple) I would like to just set it and forget it if possible....Thanks.