Hi!
Just when I thought my new system was up and running stable and overclocked, I started getting BSoDs a few days ago. Dropped down to stock settings thinking the overclock might not be stable after all, but at the same time noticed that the 12V rail was reported as below 10V everywhere (SpeedFan, Everest, BIOS). It has shown as pretty much 12V in these places before. So I decided to check with a multimeter, and sure enough, 10.4V measured. What the hell?! Has my PSU broken down? Could anything other than the PSU cause this (broken motherboard, vid card etc)?
There have been no heat issues with the PSU, extremely good airflow in the bottom part of the case, P182. PSU has never been hot to the touch, and neither has the exhausted air.
Help!
Just when I thought my new system was up and running stable and overclocked, I started getting BSoDs a few days ago. Dropped down to stock settings thinking the overclock might not be stable after all, but at the same time noticed that the 12V rail was reported as below 10V everywhere (SpeedFan, Everest, BIOS). It has shown as pretty much 12V in these places before. So I decided to check with a multimeter, and sure enough, 10.4V measured. What the hell?! Has my PSU broken down? Could anything other than the PSU cause this (broken motherboard, vid card etc)?
There have been no heat issues with the PSU, extremely good airflow in the bottom part of the case, P182. PSU has never been hot to the touch, and neither has the exhausted air.
Help!