Originally posted by: Phris
Will this RAM work with an IP35-E motherboard? I've heard of problems with voltages.
I also have a IP35-E and 4 sticks of this ram. I purchased them based on the posts on this thread.
Link. It's a long but informative read. The board booted up at a default VDimm voltage of 1.8V and I manually changed it to 2.2V.
Kupe's reply to sagis's post on that thread:
Originally posted by: sagis
Hi All, this is a great thread, and i read through all of the posts here, looking for an answer.
I'm considering buying this board today, and i'm trying to get some feedback regarding using this board with crucial balistix ram (6400) ( which i already got )
There were some people saying that you *might* need to pop in a 1.8v rated ram in order to get the board to post, so you can change the voltage to 2.2v - can someone who actually tried this let me know if the crucial ram can post or not? I just don't have extra ram around, so i'd hate to get the board and see that it won't post with the crucial sticks.
I have 2GB of Crucial Ballistix PC-6400, and haven't had any problems. I originally booted at 1.8V with the SPD timings because I didn't check everything out first. I had no problems with these settings though. I'm now running at 2.2V with the recommended 4-4-4-12 timings.
-------------------------
Intel e6600 @ 3 Ghz
Radeon X1900XT
Abit IP35-E
2 X 1024 Crucial Ballistix PC-6400
2x320GB Seagate 7200.10
1x400GB Seagate 7200.10
Sondigo Inferno
Dell 2007WFP
Antec NeoHE 500
NEC 3550A
Antec P182B