I've researched to see if this card could be softmodded like the Vivo cards and it seems that it is not easily done. At Rage3d I did find someone who says 4 of his friends have been able to mod their cards. This was a while back. Following is the link if you are interested and i copied the post that applies.
http://www.rage3d.com/board/sh...4&page=2&pp=30
All 5 of us ordered from Outpost.com, we ordered the Visiontek x800pro. After hearing about the hardmod, we decided we would take a night and see if we could work some magic. We went down to a local hobby shop that dealt with trains, and purchased 2 conductive pens.
All of our cores were the same, GA9004.1. I opted not to do mine, because I was perfectly happy with the speed the PRO offered(plus i didn't want to fubar my card yet); however, they decided to give it a shot. after carefully connecting the bridges, and reaplying the thermal paste we put the HSF back on, and tried our luck. I do not recall anybody flashing the BIOS since is was generally agreed that the cards may not be able to support the XT spec..ATI Tool reported 16pipelines..at the pro speeds. All 4 were success stories, without any problems.
I'm not sure about what memory timings they are using since they did not flash the bios, but to this day none of them have complained about the card going back to 12pipelines.
I wouldn't expect any of the softmods to work because of the lasercut, I'm sure it's doable, but just not yet. Just a FYI, all 4 cards that were modded have been able to reach overclocks of 590/1.2ghz which stock from the pro is over a 100mhz OC.