1. Worked fine for 1 hour before leaving for work, surfing, downloading.
2 . Normal shutdown.
come home, wont boot. been working fine for 4~ weeks.
all i get is 1 yellow blinking led on the lower bottom.
standby led im guessing.
NO yellow light by the ram.
did the clear cmos, 5 minuets, 30 minuets, and 8 hours. no luck
( followed procedure on dfi-street for this )
specs
Opteron 146, ran nicely at 2.9ghz, using 1.525V ( no special vid ) setting in bios
180 mem divider, ram at 2.8volts, 2.5-3-3-6 ( pqi turbo tccd -2-2-2-5 stock )
dfi sli dr motherboard, with newest bios from here.
Sparkle/Fortron 550W ( 60plg ) its the one recommended
plus a 300 watt sparkle powering odds 'n' ends ( spst switch )
tried no ram installed, no diagnostic leds, the same blinking yellow led.
in the bottom ( no ram led )
tried 5V switch for ram, no change.
tried 1 stick in top yellow no change, in top orange , no change
as soon as i plug in the power plug to the power supply, the yellow led at the bottom starts blinking.
Also no usb plugged in, a ps2 keyboard, pressing insert , no change.
tried to power using the power switch on the board, same deal.
all power plugs are in, molex, floppy, 4 pin, 24 pin.
besides testing with another power supply, taking board out, unplugging everything other then essentials, any other thoughts ?
Thanks.
2 . Normal shutdown.
come home, wont boot. been working fine for 4~ weeks.
all i get is 1 yellow blinking led on the lower bottom.
standby led im guessing.
NO yellow light by the ram.
did the clear cmos, 5 minuets, 30 minuets, and 8 hours. no luck
( followed procedure on dfi-street for this )
specs
Opteron 146, ran nicely at 2.9ghz, using 1.525V ( no special vid ) setting in bios
180 mem divider, ram at 2.8volts, 2.5-3-3-6 ( pqi turbo tccd -2-2-2-5 stock )
dfi sli dr motherboard, with newest bios from here.
Sparkle/Fortron 550W ( 60plg ) its the one recommended
plus a 300 watt sparkle powering odds 'n' ends ( spst switch )
tried no ram installed, no diagnostic leds, the same blinking yellow led.
in the bottom ( no ram led )
tried 5V switch for ram, no change.
tried 1 stick in top yellow no change, in top orange , no change
as soon as i plug in the power plug to the power supply, the yellow led at the bottom starts blinking.
Also no usb plugged in, a ps2 keyboard, pressing insert , no change.
tried to power using the power switch on the board, same deal.
all power plugs are in, molex, floppy, 4 pin, 24 pin.
besides testing with another power supply, taking board out, unplugging everything other then essentials, any other thoughts ?
Thanks.