Originally posted by: destrekor
Originally posted by: harbin
Originally posted by: destrekor
Originally posted by: harbin
@ BLT 299 in stock! $208 + shipping.
Also available at sparco.com
Update 1
Biostar 965PT ver c2
Vcore=1.31 Vdimm=2.18
400x8=3.2g seems orthos stable (3 hours). Don't know the temp as no monitor program installed.
Update 2
475x8=3.80g, Super pi 1m=13.6 sec
can you say what the voltages are for that second OC? What's your NB voltage and temp on it? I have a DFI P965, so looking to see what I can push the NB too.
I set 1.49v for Vcore in bios, but it's reported during boot in bios as 1.47v. I didn't change NB voltage. Temp on NB, I don't know.
you hit 475FSB without raising the NB voltage? Go check the BIOS to make sure it wasn't already higher than it should be. Report back. I'm interested in this situation because the NB usually needs a higher voltage to run at higher-than-stock clocks.
to clarify, I'm not accusing, just really interested in hearing this one out.
PC health Status:
Vcore 1.47~1.48
NB/SB Voltage 1.28V
DDR Voltage 2.18V
CPU Temp 43
System Temp 28
Vcore set in BIOS 1.500V, Vdimm set by jumper to 2.2v
8x475=3.8g
Vcore set to 1.525v, PC health Status reported as 1.500v, I can boot the machine to 500x8=4g, but can't enter into vista.