I did a short thin line, about 2 grains of rice long and as thick as a toothpick, installed HSF and twisted it back and forth a couple degrees 2-3 times to grind the AS5 into the crevices and get it to spread.Originally posted by: nealh
On these C2D..what is the best way to apply AS5...small dab in the center or a thin line across the cpu in horz. fashion to cover the cores
I am not going to spread AS5 in my previous testing this did nothing....
This was about my 5th time installing the AS5, and I think my best. Previous attempts on unlapped parts needed 2-3x that much AS5 to fill the gaps.
-----------------------------
ASUS P5W DH, BIOS 1503
E6600 @ 3.6 (400 FSB) @ 1.565 (lapped)
2G GSKILL PC6400 (Manual Memory Timings @ 4/4/4/12)
Scythe Infinity (modded / lapped)
Sapphire 1900xtk (lapped)
SB Audigy 2
Custom Modded SuperMicro SC-160A Case (3x120mm in, 92mm&120mm out)