e6600 + p5b dlx wifi o'clocking help with ram

[execine]

 

[execine]

maybe i'm wrong , but please read here http://www.corsairmemory.com/corsair/products/specs/TWIN2X2048-6400.pdf
Tested at 5-5-5-12-T1 latency settings at 1.9V


oh, i just have notice myself... i always tried setting it 4-4-4-12 or 5-5-5-15, never tried 5-5-5-12... maybe i should

 

[imported_Buckster]

yes - thats fine. thats what its tested at - but I'm sure all TwinX modules are rated to run at 2.1V.

Mark.

 

[execine]

later i will try 5-5-5-12 at 2.1.... if you find out anything else, please post...

 

[imported_Buckster]

what do your SPD settings say in CPU-Z please ?

at 800 MHz - mine are 5-5-5-18 ! not whats advertised at 5-5-5-15 ?!

Mark.

 

[Accord99]

Originally posted by: execine
why it should run at 2.1v if it's stock voltage is 1.9v ?

accord: 400 mhz with 8 or 9 multiplier?

Try it with 8x400 and also 9x378, both using the 1:1 divider.

 

[execine]

buckster: true, cpu-z spd at 400 shows 5-5-5-18... maybe we should try that also? i don't know already... ;/

 

[cmdrdredd]

CM2X1024-600 Week 29, Year 06

I assume you mean 6400 here but that's the same as what I have.

Don't worry about what CPU tells your memory is rated at. It reads the chip info, but doesn't know what speed Corsair tested and certified them at.

 

[execine]

i should have done more researc before buying ram, arrrrggh!!!

 

[imported_Buckster]

cmdrddredd - can I ask what you rev and serial number is please (its on the side of the memory module - easy to read) ? As from that its possible to determine the manufacturer of the actual RAM chips - yours probably is Inferion or Micron ... mine is PROMOS

Mark.