ECS GF7050VT-M Bios Options

[MysteryX]

I plan on using this board as part of a motherboard combo and I was wondering if someone who owns the board could tell me a little about what options are available to the user in the bios. I saw a few posts describing this board but I am trying to see if I can get a better understanding of what is available. Thank you.

 

[intq]

I got this board with a Frys combo deal alongside an E7200 about 2 months ago and it's been solid.

Page 33 of this PDF should tell you pretty much all you need. One important portion of it is somewhat vague so I'll elaborate. You can overclock with this board but only to fixed FSB amounts (1066, 1333, etc.). You do it through the "CPU BSEL Select" option.

If you have any other specific questions I'd be happy to answer

 

[Scaramouche]

If you want to run DDR2 800 RAM at the rated speed set the "System Clock Mode" in the "Frequency/Voltage" screen to "Unlinked" , otherwise it will run only at DDR2 667.

I concur that it is an inexpensive, yet solid board. Just don't expect it to be an overclocking monster.

 

[scsc168]

I have this MB with e2200 processor. So far, i have no success overclock using this board. When I set FSB to 1066 in CPU BSEL Select, the system would not boot up. I would get a blue death screen and the system would then reboot itself. Please advise if there are other settings that I should adjust.

Btw, for memeory, i am using OCZ's Vista Upgrade Gold edition (PC2-6400).

Thanks.

 

[csonbot]

hey fellas could you help? i'm running the E7200 and ECS GF7050VT-M set up but i cant overclock my cpu. i'm running my 800mhz ram at its stock speed with "unlinked" mode but when i try to change the cpu to 1333 in "CPU BSEL Select", it wont boot properly. what am i doing wrong?