I know you're probably pretty busy Madpacket, but any info on what you and your friend have discovered with the throttling issue would be very useful for the forum.
Hey guys. My apologies. Still busy but I'll try to summarize.
The following is for 26.5Mh per card, you can go higher but in my experience the tradeoff during this heat isn't worth it. This will get you close to 160Mh stable per rig pulling 770 - 810W (+- 40W depending on ASIC rating) from the wall.
In Wattman for each card:
GPU, setting #7 change the following:
- set speed to 1000Mhz
- set GPU VDDC to 880mv
Mem:
Set to 2190Mhz @ 900mv
Fan settings:
Manually set max RPM to 3500
Manually set Min to 60 and Max to 80 for target temp.
Provide adequate airflow over crate. Keep highest ASIC rated cards at the ends of the crate for best air flow, lowest in middle.
With these settings you shouldn't throttle using Claymore 5.3 or higher. Tested over five crates.
Let me know if you still do. Good luck!