Fan controller question...

[Impulse2k]

My case has six fans... two front intake, one side intake, two top blowholes and one on the back. If I was to get a four knob fan controller, could i control the two front intake and the two blowholes as one fan and the other two fans on their own? If so, what's the best fan controller out there? I was thinking the sunbeam rhoebus.

 

[Zepper]

As long as the load of the two fans don't exceed the rating per channel of the controller all should be OK. Look at the Super Flower too.
.bh.

 

[Impulse2k]

I have normal alluminum 80mm fans... so they should be fine.

 

[mindwreck]

look into a sunbeam fan controller, each channel supports up to 20 watts or about 3 or 4 normal fans.

 

[Corporate Thug]

another vote for sunbeam

 

[DerwenArtos12]

I have a vantec nexus and have fun 3 TT Smart case fan 2's off one channel before.

 

[GalvanizedYankee]

I don't have a fan controller yet. I will be modding my case in the next two weeks and will go with a Vantec Nexus when
I order my fans. The Sunbeam is VG and quite popular on this forum, it will also go to 0 volts. The Vantec will only go down to 7 volts. My MB shuts off all fans when the comp is in stand-by , plus my gal uses it and I would not want the fans ever turned off by mistake

Spelling edit

 

[DerwenArtos12]

a friend of mine modded his to go from liek 3 to 12 volts instead of 7 to 12. I don't knwo how he did it but I intend on fidning out. I will let all know how I did it when I do find out.