Faulty GV-R5850C-1GD???

[sharonh]

hi everyone
i have this card and i have a problem
when i turn on my pc there's display from the card when the win 7 64BIT starting windows, but when the blue screen of the os is starting, the screen turns off and there is no display from the card.
also, one of the fan is turning slower, and the temp of the pipes around it is hotter the the other fan .
in safe mode,the os is starting and after few seconds there is no display

does someone have an idea?

 

[KingFatty]

Maybe try another output port on the video card, and possibly test all 4 ports individually.

 

[LTC8K6]

Re-seat the card in the slot?

 

[sharonh]

i re seated the card several times but no luck
offence non taken...

 

[LTC8K6]

Maybe time to get modern and get a new card?

R7-360 is about $100
R7-370 is a little faster, but an older chip than the 360 and about $150

 

[KingFatty]

You could have a very simple issue, where the computer is just trying to output the signal to a non-connected display, once windows loads. After you boot up, try disconnecting the video cable from the video card, then connect it to a different port (while the computer is already booted up). You might just have confused software drivers that need to be reinstalled.

Can you try going into the BIOS of the computer, does that display on the screen?
Can you try running the computer in safe mode, does that display on the screen?
Can you try booting off another operating system, such as a Ubuntu or other Linux disc?

 

[sharonh]

first, 10X..
well the I've connected it to other port when the OS booted but, still theres no display /
Ill try to boot from other OS
thanks again

 

[KingFatty]

Also try safe mode in Windows.