- Apr 6, 2009
- 19
- 0
- 0
Hey guys
My rig has the follwoing specs
Q6600 G0 3.125VID
Xigmatek S1283
Gigabyte EP45 UD3R
4GB (2x2gb) Corsair XMS2 800mhz
BFG GTX260
I tried my first OC today by leaving everything in the Bios on Auto apart from changing the following -
Multiplier 8 > 9
FSB was already at 300 for some reason
RAM timings > 5 5 5 18
RAM voltage > 1.9
Changed my ram timings to the spec from corsair and left everything else on auto.
All power saving features are off and Load Line Calibration is on.
It booted up at 2.7ghz fine and I done a 15 min OCCT linpack test and it passed, temps were around 52C max.
If I leave these settings and change the FSB to 333 for 3ghz, do you guys think the temps will be good and will I need to change RAM ratio to 1:1 for better performance?
My rig has the follwoing specs
Q6600 G0 3.125VID
Xigmatek S1283
Gigabyte EP45 UD3R
4GB (2x2gb) Corsair XMS2 800mhz
BFG GTX260
I tried my first OC today by leaving everything in the Bios on Auto apart from changing the following -
Multiplier 8 > 9
FSB was already at 300 for some reason
RAM timings > 5 5 5 18
RAM voltage > 1.9
Changed my ram timings to the spec from corsair and left everything else on auto.
All power saving features are off and Load Line Calibration is on.
It booted up at 2.7ghz fine and I done a 15 min OCCT linpack test and it passed, temps were around 52C max.
If I leave these settings and change the FSB to 333 for 3ghz, do you guys think the temps will be good and will I need to change RAM ratio to 1:1 for better performance?