While waiting for the rest of my components (SSD, memory, psu, dvd, gpu and win7) to be delivered on Monday I started looking thru the motherboard manual (Gigabyte P67A-UD3P) and the booklet for the Antec 300 case and have a couple of questions.
1) The case has 2 preinstalled fans each with a 3 speed switch.
I take it that they get connected directly to the psu, correct? (
corsair 650TX)
If so, can i plug both fans together and then plug as one into the psu?
or should each fan plug in separately?
2) I purchased an additional
fan for the front of the case it is 3 pin but not exactly sure which pin header to use.
The mobo manual shows:
Sys_Fan1 (3 pin)
Pin 1 GND
Pin 2 +12V
Pin 3 Sense
Sys_Fan2 (4 pin)
Pin 1 GND
Pin 2 +12V/Speed Control
Pin 3 Sense
Pin 4 Reserve
Common sense would be to use Sys_Fan1 pin header but, would i be able to controll the speed of the fan?
or, can i connect the 3 pin on the fan to Sys_Fan2 and be able to control fan speed with that?
I know this might sound dumb to you guys but i'm a TOTAL newb to this stuff.
Thanks
Jim