GA-K8NS-939 + Winchester 3000

[Grimmy311]

I need a stable overclock. Can anyone with the same setup give me their over clocking settings with the stock heatsink + fan. I am kinda a newbie with overclocking, I've messed around with some older systems but nothing too recent so excuse my newbism (=. I'm trying to get up to atleast 2200 MhZ. I have 1gig of PC3200 CL2 RAM. If you need more specs let me know and I'll see what I can supply. I've looked over the forums for peoples settings and I understand most of them but not all of them. Any help would be appreciated.

 

[hafa]

Here you go:

Second post from the bottom

 

[Grimmy311]

Thanks for the reply but I have a NForce 3 chipset does that matter?

 

[hafa]

Whoops, sorry K8NS, K8NF, so close...

In terms of settings, I'd say that the NF3 chipset should overclock just as well, as I've set up many Epox boards with it and have had similar success. As I mentioned in the previous post, this is a very mild OC for this chip. Folks are getting much higher OCs with 3X HT. This should provide you with a good starting point from which you can make incrimental increases.

 

[Grimmy311]

Thanks again, I'm going to go ahead and start from there, im hoping to get to 2400 with stock cooling c(=. I'll post my results.

 

[Grimmy311]

"CPU Model Number: ADA3000DIK4BI
Core Description: Winchester
Current CPU Frequency: 2250MHz (250 x 9)
CPU Voltage: 1.40v
Stock memory timings and v
HT Frequency: 3x"

Well I tried these settings with my proc (939 +3000 winchester) and my board (GA-K8NS) and I got no video, so im guessing to much of a jump for a new proc right away?