- Mar 21, 2020
- 29
- 2
- 16
Hey everyone im planning on doing my first overclock ive been doing a lot of reading up and got a little confused with conflicting approaches and opinions on safe volts etc.
This is my setup:
ASRock B450M-HDV R4.0
Amd Ryzen 3 2200g
Corsair CMK16GX4M2B3200C16 Vengeance LPX 16 GB (2 x 8 GB) DDR4 3200 MHz
Corsair CP-9020102-UK CX550M 550 W 80+ Bronze Certified ATX Po Wer Supply Uni
The three things im most concerned about is.
People keep mentioning i showed check the VRM temp however i cant see any VRM temp in bios or HWinfo etc... despite reading up the motherboard does have it ?
Even if i get a stable OC and everything seems good no crashes etc... that im using too high of a volt so being able to know the maximum volt i should use would be good so i can drop the OC to keep within this.
And the final one OC the CPU and IGPU or just the IGPU and RAM as i've read this APU gets best results with a IFPU overclock along with RAM however the RAM timings need to be tight.. which is where im confused i got 3400 at 1.4 16,18,18,18,38 however i dont know if thats tight or not.
Any tips or even just known working settings would be great.
thanks.
This is my setup:
ASRock B450M-HDV R4.0
Amd Ryzen 3 2200g
Corsair CMK16GX4M2B3200C16 Vengeance LPX 16 GB (2 x 8 GB) DDR4 3200 MHz
Corsair CP-9020102-UK CX550M 550 W 80+ Bronze Certified ATX Po Wer Supply Uni
The three things im most concerned about is.
People keep mentioning i showed check the VRM temp however i cant see any VRM temp in bios or HWinfo etc... despite reading up the motherboard does have it ?
Even if i get a stable OC and everything seems good no crashes etc... that im using too high of a volt so being able to know the maximum volt i should use would be good so i can drop the OC to keep within this.
And the final one OC the CPU and IGPU or just the IGPU and RAM as i've read this APU gets best results with a IFPU overclock along with RAM however the RAM timings need to be tight.. which is where im confused i got 3400 at 1.4 16,18,18,18,38 however i dont know if thats tight or not.
Any tips or even just known working settings would be great.
thanks.