Originally posted by: Rottie
either way and what is the difference?
Originally posted by: Fullmetal Chocobo
Originally posted by: Rottie
either way and what is the difference?
Difference... Passive uses air movement already present--it basically put a heatsink on your hard drive. Active cooling put the heat sink and a fan on the hard drive, producing the air flow to cool the hard drive. Passive cooling solutions are completely silent; active cooling solutions create noise due to the fan.
Do you have 5.25" bays to put your hard drives in? Or are you looking to install something in the 3.5" bay area?
EDIT: By the way, are your hard drives warm to the touch? You very well may be getting an error in reading the temp from there. That is always possible. And do you always have your case open--the side panel off?
Originally posted by: Susquehannock
IMO an "active" set up is usually overkill. Mount your HDDs inside of a case intake fan & you should be fine.
That's active.Originally posted by: Susquehannock
IMO an "active" set up is usually overkill. Mount your HDDs inside of a case intake fan & you should be fine.
Um...Originally posted by: tallman45
If you have a 750gb drive expect it to be warmer than a 80gb drivem the larger has more platters and moving parts
Some brands and models in each brand run warmer than others. a 7200.9 Seagate runs much warmer than a WD RE
BTW, for what it's worth, I'm running a single 120mm Vantec fan over, e.g. through the drive cage for, the drives mentioned above.Originally posted by: Rottie
I check speedfan that shows two seagate hard drives temp at 49c I googled and it says all drives should be below 40c but my case is open I wonder if I need two coolers for both hard drives. They are new hard drives.