HELP! My AXIA a Dud?

[xWeston]

Here are the codes from my CPU

AMD Athlon
A1200AMs3C
AXIA0108SPFW
95029550761

I can only seem to get mine to run 1333 stable, and it's a 1.2.. I am running 10x133. I tried to run 9.5x141 and 9x148 but no dice on either. I have Crucial PC133 cl2 ram, so it should be able to run these higher speeds, but it wont! Also i've tried just multiplier overclocking without changing fsb (as not to screw with ram) and the highest i could get was 133x10.5.
Look at stats below or post a reply with any questions/suggestions please!

Weston

 

[rpr]

Compuwiz mentioned a while ago that 1.33 is about average for a week 8 AXIA.

 

[tpetre4322]

i have heard rumors of the wz01 bios o/cing the best try raising your vi/o ,and make sure your northbridge is nice and cool.did you try the ram high fsb at cas3 just to test if thats it.

 

[xWeston]

Yes i tried running the ram at cas3... maybe like previously said, week 8 just blew. It's alright because i got this processor when building a system for a friend. He got my old 1.2 200mhz, and i got this one. Didnt have to pay any extra.
Another weird thing that happens, is if i do a lot of load on my processor, for example encoding divx, playing CS, or doing sandra burn-in, at 1.65volts, it runs fine all the way through the stress, and then it freezes as soon as the stress stops, is that weird?

 

[xcourse]

My tbird 1100 on an A7V133 will not go higher than 140fsb, and it doesn't like that. Perhaps your 1200, AXIA or not, is the same. Try 10x140 and downward until it runs OK.

 

[kat22]

i have a week 01/08 that runs fine a 1431 but only with max volts1.89

 

[Jagators]

xWeston

Try raising your V1.85. I noticed you had mentioned 1.65 at one time.

 

[xWeston]

I did try 1.85. I have had it boot and work for about 10 minutes at 1.43ghz before.