Very desperate for help. Here is the problem:
With my 9800p installed I boot up and get artifacts / gibberish on screen and then it freezes after the black Windows XP startup screen. So I took out 9800p and booted using integrated video on my motherboard. I then removed all old ATI drivers using sugested method on Rage3d website. Now when I boot up the monitor doesn't come out of standby (the light goes back and forth from green to amber, then just stays amber). I seem to get either one of these problems depending on what day it is. I use to get stop errors (usually Kernel_data_in_page_error, or IRQ_not_less_than_or_equal) so I formated and all was fine for a month or so. Until just recently when I tried my 9800p.
I have tried the following to fix:
Tried a new video card
Tried new memory
Formatted / clean install
The only way I can boot normally is if I unplug and take out my 9800p and use the integrated video on my motherboard. About 6 months ago the video card worked fine. My only other idea is that the Motherboard (AGP slot maybe?) is bad or the power supply is too small (but I doubt that).
Specs are as follows:
P4/3.0C with Intel 865GBF motherboard
512mb Kingston HyperX (also tried testing w/ PNY)
Radeon 9800pro 128mb
Antec True 350watt
WD Raptor HD
Latest BIOS/Chipsets/CAT drivers with WinXP Pro SP2
Thanks for any help, posts, suggestions. Like I said, I am desperate and really don't want to replace my motherboard if I don't have to.
With my 9800p installed I boot up and get artifacts / gibberish on screen and then it freezes after the black Windows XP startup screen. So I took out 9800p and booted using integrated video on my motherboard. I then removed all old ATI drivers using sugested method on Rage3d website. Now when I boot up the monitor doesn't come out of standby (the light goes back and forth from green to amber, then just stays amber). I seem to get either one of these problems depending on what day it is. I use to get stop errors (usually Kernel_data_in_page_error, or IRQ_not_less_than_or_equal) so I formated and all was fine for a month or so. Until just recently when I tried my 9800p.
I have tried the following to fix:
Tried a new video card
Tried new memory
Formatted / clean install
The only way I can boot normally is if I unplug and take out my 9800p and use the integrated video on my motherboard. About 6 months ago the video card worked fine. My only other idea is that the Motherboard (AGP slot maybe?) is bad or the power supply is too small (but I doubt that).
Specs are as follows:
P4/3.0C with Intel 865GBF motherboard
512mb Kingston HyperX (also tried testing w/ PNY)
Radeon 9800pro 128mb
Antec True 350watt
WD Raptor HD
Latest BIOS/Chipsets/CAT drivers with WinXP Pro SP2
Thanks for any help, posts, suggestions. Like I said, I am desperate and really don't want to replace my motherboard if I don't have to.