I installed a 2tb drive to backup my 640gb x 2 raid 0...and when I rebooted my bios gave me a "raid failed" screen. :*(
Drives are on intel raid controller ich10r (evga x58) black ports--
Intel Rapid storage is showing the 2 drives, but no longer in raid.
Windows is showing the full raid 0 in disk management
I cannot enter my ctrl-I raid management after the bios screen because it flashes by in a millisecond. No amount of insane pounding can get me to that screen. Ive tried unplugging and plugging in blank drives to get the raid manager up again, but it always flashes by.
This makes me think that the on board controller fried.
Is there anything I can do with the partition in windows?
Drives are on intel raid controller ich10r (evga x58) black ports--
Intel Rapid storage is showing the 2 drives, but no longer in raid.
Windows is showing the full raid 0 in disk management
I cannot enter my ctrl-I raid management after the bios screen because it flashes by in a millisecond. No amount of insane pounding can get me to that screen. Ive tried unplugging and plugging in blank drives to get the raid manager up again, but it always flashes by.
This makes me think that the on board controller fried.
Is there anything I can do with the partition in windows?