Wierd problem. Happened twice now. Computer locks up solid, nothing will respond, not even power-button on case, reset button works. After I hit reset, the computer will NOT detect my hard drives, just sits at the screen saying "Detecting IDE Devices." I have to power it down, then back up, and everything's fine after that. Had been running Windows ME on this setup for a few weeks with no problems.
System is as follows:
Abit KT7 Motherboard
Duron 600 @ 1Ghz
128MB CAS3 PC133 (Mushkin)
Maxtor 30GB Hard Drive (7,200 rpm)
Maxtor 4.3GB Hard Drive (4,300 rpm)
Voodoo3 2k
SIIG PCI Sound Card
Kingston Network Card
Tekram DC390 SCSI2 Card
I've checked and the hard drives are jumpered properly, both are on the same ATA-66 cable on the primary port.
Any ideas? I'm not sure what to try next.
Thanks,
Dennis
System is as follows:
Abit KT7 Motherboard
Duron 600 @ 1Ghz
128MB CAS3 PC133 (Mushkin)
Maxtor 30GB Hard Drive (7,200 rpm)
Maxtor 4.3GB Hard Drive (4,300 rpm)
Voodoo3 2k
SIIG PCI Sound Card
Kingston Network Card
Tekram DC390 SCSI2 Card
I've checked and the hard drives are jumpered properly, both are on the same ATA-66 cable on the primary port.
Any ideas? I'm not sure what to try next.
Thanks,
Dennis